Roll-N-Go Boat Shore Docking System

This revolutionary shore dock from Roll-n-Go, lets you easily pull your jon boat or small v-hull right up onto the shore to store out of the water. Simple to use, all you need to do is pull up to the dock, attach the hook at the end of the winch strap to the boat, and crank it up. The boat rolls up the ramp easily thanks to the shore dock system's polyurethane rollers.

  • Pulls lighter boats up onto the shore easily for out of the water storage
  • Affordable and less complicated than in-water lift systems
  • Easy rolling polyurethane ‘doughnut-style’ rollers
  • Extension sections available
5 Year Warranty
Item # Weight
Capacity
Width Status Price Quantity
RNG750 750 lbs 21" - 24"
In Stock
$1,449.99
$80.00
RNG1200 1,200 lbs 24" - 40"
In Stock
$1,759.99
$105.00

Detail

Unlike many in-water lifts, the Roll-n-Go boat shore dock is a simple to use, affordable way to store flat and v-hull boats out of the water, right up on the water's edge. Pulling the boat up is easy and quick; all you need to do is drive up to the base, attach the winch strap to the boat, and start cranking. The boat will roll up to the winch on ‘doughnut-shaped’ polyurethane rollers. Two sizes of the boat dock system are available to accommodate different boat sizes, each with adjustable rails.

Roll-N-Go's innovative line of shore docks are modular, making them simple to setup and customize with available extensions and accessories. Built to last, these boat docking systems are constructed of corrosion-resistant aluminum and have a 5-year manufacturer warranty.

92 lbs (RNG750), 130 lbs (RNG1200)
17’ 10"
Aluminum
Stainless Steel

Product Features

  • Pulls lighter boats up onto the shore easily for out of the water storage
  • Affordable and less complicated than in-water lift systems
  • Winch with 25' strap
  • Easy rolling polyurethane ‘doughnut-style’ rollers
  • Adjustable rail width to fit many different sizes of boat
  • Corrosion-resistant aluminum construction
  • Includes ground anchoring system
  • Simple to assemble
  • Extension sections available
  • Minimum Required Anchoring is a Screw-in or Fasten to Wall or Flooring
  • Rail Width:
    RNG750: 21" – 24"
    RNG1200: 24" - 40"
  • Number of Rollers: 12 (RNG750), 16 (RNG1200)
  • Roller Bearing is Delrin spanner and bushing
  • Roller Type ‘Doughnut-shaped’ polyurethane
  • Hook Type is a Standard Boat Hook
  • Winch ‘Dead Lift’ Rating 1,100 lbs (RNG750), 1,700 lbs (RNG1200)
  • Winch Gear Ratio 4:1 (RNG750), 5:1 (RNG1200)
  • Winch Strap Length is 20’ (RNG750), 25’ (RNG1200)
  • Winch Materials is Zinc Plated Steel

Warning and Usage Guidelines

Warranty reduced to 2 years for salt-water applications

Documents

RNG750 Instruction Manual
RNG1200 Instruction Manual

Review Summary