The EZ carrier is a simple and easy way to load and transport your scooter or powered wheelchair. Each scooter carrier measures 50" long by 28" wide with an attached ramp measuring 27" wide by 42" long that can be folded flat onto the carrier or pinned half way when in transport. The platform includes 3" security rails and the ramp includes 2" rails. The mobility carrier features a sturdy steel frame and mesh floor for easy cleaning and no puddling water. This carrier has a durable powder coated black finish. The EZ carrier is available for class 2 and 3 receivers and is designed for hitch heights of 12 to 14". The EZ1 is a non-folding carrier. The EZ2 scooter carrier enables you to fold the scooter carrier upright when not in use. The EZ3 model folds up vertically as well and also includes an adjustable platform height adapter allowing you to raise or lower the platform height by 1, 3, or 5".
Need a hitch for a mobility carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!
NOT recommended for any tow-behind trailers including 5th wheel trailers & camping trailers due to excessive bouncing of the vehicle's suspension
EZ Carrier Image Gallery
- Carrier platform measures 28" x 50" with 3" side rails
- Hinged loading ramp measures 27" x 42" with 2" side rails
- Usable platform area measures 26-1/2" x 49-1/2"
- Weight capacity - 200 lbs for Class II or 350 lbs for Class III
- Steel construction for durability
- Ramp now pivots from the side so you don't have to drive over hinges
- 2", 6", or 8" from center of pin hole to carrier when folded vertically
- Powder coated for a lasting finish (baked on paint)
- Virtually maintenance free
- Horizontal adjusting screw allows the carrier to be level
- Anti-wobble hitch pin bolt included for Class II (eliminates rocking motion & theft)
- Spring Nut / Bolt included for Class III (eliminates rocking motion & theft)
- Two reflectors included
- EZ2 and EZ3 models fold up vertically behind vehicle when not in use
- Model EZ3 includes a platform leveling bolt to adjust front to back tilt
- EZ3 model includes an adjustable platform height adapter - adjusts platform 1", 3", or 5" up or down
- 2 Year Warranty
- Never exceed your vehicles hitch weigh limit: Most Class II hitches are rated at 300-350 lbs, Class III hitches are rated for 500 lbs, Class IV hitches are rated for 1000 lbs
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
- Please check with your dealer to find out if your vehicle's carrying capacity
- NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers
|
EZ Carrier Specifications
| Item # |
Usable Dimensions |
Weight Capacity |
Weight |
Vehicle Hitch Height |
| EZ1-II |
26-1/2" X 49-1/2" |
200 lbs |
74 lbs |
12" to 14" |
| EZ2-II |
26-1/2" X 49-1/2" |
200 lbs |
79 lbs |
12" to 14" |
| EZ3-II |
26-1/2" X 49-1/2" |
200 lbs |
84 lbs |
12" to 14" |
| EZ1-III |
26-1/2" X 49-1/2" |
350 lbs |
72 lbs |
12" to 14" |
| EZ2-III |
26-1/2" X 49-1/2" |
350 lbs |
77 lbs |
12" to 14" |
| EZ2-III |
26-1/2" X 49-1/2" |
350 lbs |
82 lbs |
12" to 14" |
|
Find a trailer hitch for your vehicle with the Hitch Selector!
EZ Carrier Product Specifications
| Item # |
Description |
Features |
Hitch Size |
| 1-1/4" Hitches (Class 2) |
| EZ1-II |
Scooter Carrier w/ Ramp - Model A |
Non-Folding |
1-1/4" - Class 2
How Can I Tell? |
| EZ2-II |
Fold-Up Scooter Carrier w/ Ramp - Model B |
Folding |
1-1/4" - Class 2
How Can I Tell? |
| EZ3-II |
Fold-Up Scooter Carrier w/ Ramp + Rise/Drop Adapter - Model C |
Folding + Rise/Drop Adapter (1", 3" or 5" up or down) |
1-1/4" - Class 2
How Can I Tell? |
| 2" Hitches (Class 3 & 4) |
| EZ1-III |
Scooter Carrier w/ Ramp - Model A |
Non-Folding |
2" - Class 3
How Can I Tell? |
| EZ2-III |
Fold-Up Scooter Carrier w/ Ramp - Model B |
Folding |
2" - Class 3
How Can I Tell? |
| EZ3-III |
Fold-Up Scooter Carrier w/ Ramp + Rise/Drop Adapter - Model C |
Folding + Rise/Drop Adapter (1", 3" or 5" up or down) |
2" - Class 3
How Can I Tell? |
|
Order Here
|
Price |
|
$399.99 - $579.99 + FREE Shipping!
$399.99 + FREE Shipping!
$459.99 + FREE Shipping!
$579.99 + FREE Shipping!
$399.99 + FREE Shipping!
$459.99 + FREE Shipping!
$579.99 + FREE Shipping!
|
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| EZ2-RISE-DROP-II |
Rise/Drop Adapter for EZ2 carriers (Class 2)
(Replaces standard hitch bar - WILL NOT FIT EZ1 MODELS)
Allows platform to be adjusted 1", 3", or 5" up or down
Weight Capacity: 200 lbs |
- |
+ FREE Shipping!
|
| EZ2-RISE-DROP-III |
Rise/Drop Adapter for EZ2 carriers (Class 3)
(Replaces standard hitch bar - WILL NOT FIT EZ1 MODELS)
Allows platform to be adjusted 1", 3", or 5" up or down
Weight Capacity: 350 lbs |
- |
+ FREE Shipping!
|
| LICENSE PLATE RELOCATOR KIT |
License Plate Relocator Kit for EZ carriers
Allows license plate to be seen when carrier is in use
Includes an adjustable lever so license can be seen when carrier is in both the upright and carry position
License Plate Relocator Kit Instructions |
Enlarge Image |
+ FREE Shipping!
|
| CARGO-BUCKLE |
CargoBuckle self-retracting ratchet strap
Includes hardware |
Enlarge Image |
+ FREE Shipping!
|
| ANTI-DRAG-WHEEL |
Anti-Drag Wheel
Attaches to the back of the EZ Carrier to avoid scraping the bottom on steep inclines - Some drilling required |
Enlarge Image |
+ FREE Shipping!
|
| EZ-LOADER-RAMP |
EZ-Loader Ramp
Folds out from regular ramp to reduce angle of incline, providing better traction - Great for 6-wheel power wheelchairs - 25" wide 23" long |
Enlarge Image |
+ FREE Shipping!
|
| SHP-2040 |
Silent Hitch Pin (for Class III & IV hitches)
Keeps tow accessories secure and rattle free
Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock
Silent Hitch Pin Product Details |
Enlarge Image |
+ FREE Shipping!
|
| AL100-Cover |
Heavy Duty Scooter Transport Cover
Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover. Size of cover is 33" tall x 28" wide x 55" long.
Mobility Scooter Cover Product Details |
Click to view cover |
+ FREE Shipping!
|
| AL500-Cover |
Heavy Duty Power Chair Transport Cover
Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover with four slits in each corner of the cover to accommodate the four tie down straps. Size of cover is 38" high x 23" wide x 44" long.
Power Chair Cover Product Details |
Click to view cover |
+ FREE Shipping!
|
| VH-MStrap-C |
4 Cam Buckle Tie Downs
1 inch wide black cam buckle strap tie down kit with a 1200 lb capacity
Kit Includes: 4 cam buckle straps
|
Enlarge Image |
+ FREE Shipping!
|
| VH-MStrap |
4 Piece Tie-Down Straps
1 inch wide black straps with a 1200 lb capacity
Kit includes: 2 cam buckle straps + 2 ratchet straps
|
Enlarge Image |
+ FREE Shipping!
|
| VH-MStrap-R |
4 Piece Ratchet Strap Kit
1 inch wide black ratchet strap tie down kit with a 1200 lb capacity
Kit Includes: 4 ratchet straps
|
Enlarge Image |
+ FREE Shipping!
|
| HP31 |
Locking Hitch Pin
For 2" Class III and IV receivers - 5/8" x 2-3/4" - Includes two keys
Locking Hitch Pin Product Details |
Enlarge Image |
$17.99 + FREE Shipping!
|
| A20402 |
Standard Hitch Pin
For 2" Class III and IV receivers - 5/8" x 4-3/4"
Standard Hitch Pin Product Details |
Enlarge Image |
+ FREE Shipping!
|
|
Powersports
Wheelchair / Mobility
Pet
Vehicle Cargo
Recreation / Storage
Commercial / Utility
Pickup Truck
