Race Ramps Solid Car Trailer Ramps for Enclosed Trailer - 6,000 lb Capacity

In Stock

The cut-out trailer ramps are designed to load low-profile vehicles into enclosed trailers that contain an extension flap. The first end cut-out is designed as a resting place for the trailer door. A second cut-out is the resting place for the extension flap. This helps create a smooth and gradual transition when loading a low-profile vehicle.

  • Designed for enclosed trailers
  • Loads low profile vehicles
  • Cut-outs for trailer door rest
  • Reduces approach angle by 5.2 degrees
  • 14" width fits wider tires
  • 6,000 lb weight capacity


Race Ramps trailer ramps with flap cut-out help load and unload low profile vehicles safely into enclosed trailers with an extension ramp. These ramps have a specially designed cut-out that allows a flap up to 16" to rest on it during loading. The ramps reduce the angle of approach to 5.2° to prevent scraping the underside of a vehicle.


Race Ramps flap cut-out trailer ramp is specially designed for enclosed trailer ramps that include an extension flap. This ramp has a built-in cut-out that provides a resting place for up to a 16" trailer flap. Trailer ramps with a flap cut-out are designed to safely get low ground clearance vehicles on and off trailers without scraping or damaging the underside of the vehicle. Made by Brute Industries, these ramps use a patented lightweight technology when constructing the ramps to ensure that they are durable and very stable. The material used for the flap cut-out trailer ramp is easy to clean and won't rust like metal trailer ramps. The unique coated surface won't scratch or scuff garage floors or asphalt and provides a no-slip surface. For storage, trailer ramps conveniently hang on a wall with the attached handles located at the end of each ramp. If this is not the trailer ramp you're looking for, then check out Race Ramps standard length trailer ramps, available in several different heights.

Race Ramps Trailer Ramps with Flap Cut-Out to fit up to a 16" extension flap - Set of 2
38 lbs
6,000 lbs

Product Features

  • Specially designed for enclosed trailer doors that have an extension flap
  • Load and unload low profile vehicles onto a trailer without scraping
  • Cut-outs in the ramp provide a resting place for up to a 16" flap
  • Reduces the ramp angle of approach to 5.2°
  • 14" wide to accommodate cars with wide tires
  • Built with patented material to ensure these ramps are lightweight, durable and very stable
  • Coated surface prevents scratches and damages to flooring
  • Easy to clean and won't rust
  • Built in straps for easy transport and to hang on a wall for storage
  • Supports up to a 6,000 lb vehicle (per pair)
  • 1 year warranty

Warning and Usage Guidelines

  • Before using the ramps ensure other persons are clear of the vehicle and the ramps
  • Ensure that the ramps are free from damage or corrosion before use.
  • Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
  • Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
  • Carefully drive the vehicle onto the automotive ramps until it is in the correct position
  • Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
  • Before starting work, walk around the vehicle ensuring it is securely positioned
  • Always use jack stand if a person will be going under the vehicle
  • On completion of the work, check the parking brake is still firmly on and remove the chocks
  • It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
  • Exercise caution when using these car ramps with a trailer or three wheeled vehicle


Instruction Manual

Review Summary