Rubber 3 Channel Cable Protector - Right Turn

Right turn 22.5 degree cable connector for customizing the design of your cable protector system. Easily paired with straight and left turn pieces. Made from high weight capacity heavy duty rubber.

  • Protects up to 3 cables or wires from any type of traffic
  • Made from heavy duty rubber
  • 22.5 degree turn/28 degreee incline
  • 24,000 lb capacity per axle
  • Pair with straight (DH-CP-4) or right turn (DH-CP-4L) sections
  • Uses an interlocking tab system to connect additional straight or curved pieces
  • Yellow and black for maximum visibility
  • Diamond tread pattern to prevent slips
  • Hinged lid for easy placing and removing of cables
$39.99
DH-CP-4R
$5.00
In Stock. Ships within 24 hrs.
Call for Shipping Discounts on Large Quantities
1 Year Warranty

Summary

Protects cables and hoses while directing them around racks, posts, and other objects. Can be connected to multiple curve sections to create larger curves. 4 sections required to create a 90° turn.

Detail

Direct cables around posts, racks and other objects with these right curve sections. Each turn section has male and female interlocking tabs to secure to the end of the 3-Channel Floor Cable Protector. Use 1 right curve piece to create a 22.5° curve, or connect multiple curve pieces to create larger turns (4 right curve pieces are needed for a 90° turn). These turn sections, like the Floor Cable Protector, have 3 2-1/2"W x 2-1/8"H channels for cables and hoses. A heavy duty rubber base and yellow PVC lid gives the right curve cable ramp section the ability to hold up to 12,000lbs per wheel. Raised tread on both the base and lid provide extra traction for people and vehicles going over the cable ramp. With every cable protector turn section, a 1 year manufacturer warranty is included.

3-Channel Rubber Cable Ramp Turn - Right
Yellow Lid, Black Ramp
4 1/2" short side
12" long side
19-3/4"
3"
2-1/2"
2-1/8"
12,000 lbs
24,000 lbs
11 lbs
-40°F to 131°F

Product Features

  • Guides hoses and cables around poles, racks and other objects
  • Links to the 3-Channel Floor Cable Protector
  • Creates a 22.5° curve, or can be used with multiple turn sections to create larger curves (4 sections are required for a 90° turn)
  • Protects up to 3 hoses or cables
  • Heavy duty rubber base with a PVC lid supports up to 12,000lbs per wheel
  • Raised tread aids traction
  • Includes a 1 year manufacturer warranty

Warning and Usage Guidelines

4 Pieces needed to create a 90° turn

Review Summary