Folding Wheelchair Carriers

Designed to carry standard folding wheelchairs, the Tilt 'n' Tote wheelchair carrier mounts to a class 1, 2, or 3 trailer hitch adaptor, includes an anti sway bar, and will support up to 100 pounds! Simply remove the ball of your hitch receiver and bolt lift to the adaptor making it universal for mounting on different vehicles. Installs in seconds. To use, just pull the release bar which permits the rack to tilt to the ground. Then roll your wheelchair into place and tilt back to the upright position, where it locks into place. Almost no leverage is needed to tilt into locking position because of leverage principles. Locking arm holds the wheelchair securely in place. A pull handle tilts the carrier into storage position, out of the way when not in use. Sturdy all welded steel construction, powder coated on all parts.
Simply roll the chair into position...and lock into place, that's it!!
Need a hitch for a mobility carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!

Folding Wheelchair Carrier Image Gallery

Folding Wheelchair Carrier Product Features:

• For manual folding wheelchairs
• 100 lb weight capacity
• Tilting joint for easy mounting
• Adjustable lock down arm
• Front wheel pan
• Rear wheel cradle
• Weighs only 25 lbs
• Installs on class II, and III trailer hitch receiver bars
• Optional class II or class III hitch adaptor sold separately
• Save your back, don't lift --TILT 'N' TOTE
• Also available in a low cost non folding design
• Bolts on to any ball mount or draw bar - see how
• Instructions

Simple, easy to operate, and constructed to last.
The TILT 'N' TOTE can be installed or removed in seconds. Almost no effort is needed to tilt into locking position. No lifting required

Find a trailer hitch for your vehicle with the Hitch Selector!

Recommended Accessories

Item #	Description	Image	Price
45050	2" Ball Mount Receiver Hitch - Rated: 6,000 GTW / 600 TW - 1" Shank Size		+ free s&h
45521	1-1/4" Ball Mount Receiver Hitch - Rated: 3,500 GTW / 350 TW - 3/4" Shank Size		+ free s&h
SHP-2030	Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock For Class III & IV hitches	Enlarge Image	+ free s&h
AL100-Cover	Heavy Duty Scooter Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover. Size of cover is 33" tall x 28" wide x 55" long. View More Information	Click to view cover	+ free s&h
AL500-Cover	Heavy Duty Power Chair Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover with four slits in each corner of the cover to accommodate the four tie down straps. Size of cover is 38" high x 23" wide x 44" long. View More Information	Click to view cover	+ free s&h
VH-MStrap-C	1 inch wide cam buckle strap tie down kit (4 cam buckle straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
VH-MStrap	1 inch wide straps. Kit includes:(2 cam buckle straps + 2 ratchet straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
VH-MStrap-R	1 inch wide ratchet strap tie down kit (4 ratchet straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
HP31	Locking Hitch Pin for 2" Class III and IV receivers - 5/8" x 2-3/4"	Enlarge Image	+ free s&h
A20402	Standard Hitch Pin for 2" Class III and IV receivers - 5/8" x 4-3/4"	Enlarge Image	+ free s&h