
Safely store and transport your firearm with the Gun Boot IV by Kolpin. This popular gun boot is available in either the Impact or Transport model. The Impact gun boot is available in Mossy Oak New Breakup camo, Realtree Hardwoods camo, or black finish. Its removable shock-absorbing liner is constructed of foam and nylon, providing superior protection within the hard case. The Gun Boot IV Transport has a soft carrying case that fits into the hard case instead of the Impact liner. The removable soft gun case has a durable Cordura exterior, full length zipper, and spacious interior. Two layers of dense closed cell foam give you maximum protection and fit. The hard case features an ergonomic handle and attachment points for a sling. The Kolpin Gun Boot accommodates right and left hand bolt action rifles and shotguns, and is roomy enough for 50mm scopes and rifles with attached slings. The Gun Boot IV can be mounted to an ATV or UTV with a bracket system, sold separately.
Kolpin Gun Boot IV Image Gallery

- Polyethylene hard case has ergonomic handle
- Molded in attachment points for sling
- Accommodates right and left hand bolt action rifles & shotguns
- Room for 50mm scopes and rifles w/ attached slings
- Bracket system mounts gun boot to ATVs/UTVs (sold separately)
- Compatible w/ the Utility Gear Rail System for use on your UTV
(Sold separately, requires Boottector Bracket or Double Gun Boot Mount)

|
- Removable shock-absorbing foam and nylon liner
- Available in black or two camo designs
- Spacious soft carrying case that fits into hard case
- Soft case has Cordura exterior w/ full length zipper
- Two layers dense closed cell foam in soft case
|
Kolpin Gun Boot IV Product Specifications & Price
| Item # |
Manufacturer |
Description |
Fits |
Price |
| 20051 |
Kolpin Outdoors Inc. |
Gun Boot IV Impact in Black w/ shock-absorbing liner |
Firearms up to 51" L - 50mm scopes - Rifles w/ attached slings |
+ 10 s&h
|
| 20061 |
Kolpin Outdoors Inc. |
Gun Boot IV Impact in Mossy Oak New Breakup Camo w/ shock-absorbing liner |
Firearms up to 51" L - 50mm scopes - Rifles w/ attached slings |
+ 10 s&h
|
| 20055 |
Kolpin Outdoors Inc. |
Gun Boot IV Transport in Black w/ soft carrying case |
Firearms up to 51" L - 50mm scopes - Rifles w/ attached slings |
+ 10 s&h
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| 20035 |
Boottector Bracket - Secures Kolpin Gun Boot to virtually any ATV rack. Fiberglass-reinforced nylon construction w/ brass insert. Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Compatible with the Utility Gear Rail System for UTVs and the Gear Lock & Load System. Instructions |
 Enlarge Image |
+ 10 s&h
|
| 20032 |
Gun Boot IV Loop Bracket - Steel construction w/ rubber coated ring. Adjustable to multiple angles between 0° and 45°. Can be mounted to ATV racks, UTV bed rails, or any flat drillable surface. Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Compatible with Gear Lock & Load System. Instructions |
 Enlarge Image |
+ 10 s&h
|
| 20036 |
UTV Double Gun Boot Mount - Carries two Kolpin Gun Boots. Heavy gauge steel with multiple attachment points. Universal design fits most UTV's rear mesh or center roll bar tubing. Does not interfere with rear dump box use. Fits Kolpin Gun Boot IV cases only! Instructions |
 Enlarge Image |
+ 25 s&h
|
| 20029 |
Gun Boot IV One Piece Bracket - One piece polyethylene design with superior geometry. Pre-set angle is a perfect fit for intermediate and smaller ATVs. Mounts to either side of ATV rack. Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Compatible with Gear Lock & Load System. Instructions |
 Enlarge Image |
+ 10 s&h
|
| 20129 |
Gun Boot IV Metal Bracket - Two-piece steel bracket mounts Gun Boot horizontally. Works with most UTV bed rails. Fits Kolpin Gun Boot IV cases only! Instructions |
 Enlarge Image |
+ 10 s&h
|
| 26200 |
Kolpin UTV Gear Transport System Provides a flat mounting platform for accessories to be mounted to a UTV roll cage - Adjustable base locks in every 15° - Heavy duty mounting bands w/ rubber inserts fit round roll bars from 1.25" to 2" diameter UTV Gear Transport System Product Details |
 Enlarge Image |
+ 9 s&h
|

|