Powered Hitch Mobility Carrier
Electri-Lift gives you the power to transport powerchairs and power-scooters
The Electri-Lift powered mobility carrier is a convenient and helpful solution to transporting a power scooter or power wheelchair with a vehicle by the hitch receiver instead of towing a long trailer, or trying to figure out how the mobility device might fit inside the vehicle. The Electri-Lift powered hitch carrier makes mobility hauling a breeze with a drive-on / drive-off powered lifting platform, adjustable tire wells, and (2) custom integrated retractable ratcheting tie-down straps to secure a powerchair or wheelchair for transport in seconds. Wired and wireless installation options are available.
Save over $300! No swing-away device required!
Instant access to your rear vehicle hatch
The Electri-Lift powered mobility carrier saves time, and it saves you money when compared to other powered mobility lifts. When Electri-Lift is lowered completely, you can access the rear vehicle hatch without the need for a swing-away device, and save over $300! This unique patent pending design provides plenty of clearance so you can easily access the rear of your vehicle without having to unload the lift, or add a device to swing the lift away from the vehicle.
Optional wireless installation
Plug-n-Play battery pack
The ELECTRI-LIFT-B includes a powerful Plug-n-Play rechargeable, 18 volt lithium-ion battery pack right on the lift, so no additional wiring harness is needed to power the lift. (Flat 4 standard wiring is required to power the license plate light.) A fuel gauge displays the remaining power level, making it easy to see when it needs to be charged with the included standard household charger.
Space saving vertical compact storage
Folds parallel to the rear of your vehicle making it easy to store
Upon reaching the destination, some vehicles may require a little extra room in the garage or parking lot and the Electri-Lift is there to help once again. After unloading the powered scooter carrier, a pair of platform arms can be moved into a second position allowing the platform to fold upright and reduce vehicle storage space without having to remove it from the vehicle's hitch. If the wheelchair lift needs to be transported unloaded, there are plenty of reflective safety stripes for added visibility when folded vertically, and the 49-3/8"L platform will not obstruct vehicle tail lights. The license plate also remains visible with an included mounting bracket and light attached to the motor housing.
Loaded with the right features to make life easier
Comfort and convenience with all the right tools
The patent pending Electri-Lift handicap wheelchair lift secures to a 2" Class III/IV hitch receiver and is available with wired or wireless installation options for on-demand raising and lowering of the lift platform. ELECTRI-LIFT wires directly to the vehicle's battery and includes a 20 ft. long wiring harness with 25A breaker and a 4-prong trailer light attachment plug. ELECTRI-LIFT-B features an easy-to-use, plug-n-play battery pack that includes a removable, 18 volt quick-charge lithium battery with power gauge for easy installation of the carrier. Power to the electric mobility lift is controlled by both an On/Off key switch to prevent battery drain, and an Up/Down toggle switch for ease of use. Power is also supplied from the vehicle separately with a 4-prong trailer light plug to keep the license plate light illuminated anytime the vehicle's headlights are on. Certain vehicle models may need to switch headlight control to a constant setting, rather than automatic, to ensure the license plate light is working properly. The lift requires between 10" to 20" ground clearance, depending on hitch adapter orientation, to prevent the carrier from hitting the ground during travel and especially on inclined surfaces. Every carrier is constructed with a heavy duty reinforced steel frame in a smooth black powder-coat finish and features a high-traction platform designed for added grip on mobility device wheels. Maximum 350 lb load capacity. Patent pending design includes a 2 year warranty. Made in the USA.