- Safely transport motorcycles up to 800 lbs with the extra-stable Deluxe Cam-Loc motorcycle carrier. The high quality construction and integrated cam lock device provide support and stability for your heavier, more valuable bikes.
Confidently haul bikes up to 800 lbs with the durable, stable, Heavy Duty Cam-Loc motorcycle carrier. This motorcycle carrier is constructed of black powder coated all welded steel, with larger diameter cross brace tubing for an extra sturdy design. Two 36" tie down bars provide 4 tie down points and the wider design provides more stability for larger bikes. This heavy duty motorcycle carrier also includes an integrated cam lock device that eliminates hitch wobble. This system works by pulling a small wedge from behind the hitch forward to eliminate the extra space and create a tight fit. Learn more about Cam-Loc and how to use it. Bikes with wide rear tires are not a problem, as the channel accommodates rear tires up to 10" wide. The channel is 78" long, and a 7' ramp is included which can be mounted right on the carrier for storage. This motorcycle carrier fits a class III 2" frame-mounted hitch, although a class IV or V is recommended. The Deluxe Heavy Duty Cam-Loc motorcycle carrier has a weight capacity of 800 lbs, so please check the hitch rating and suspension carrying capability of the carrying vehicle before loading. Improve the visibility of the carrier by adding LED lights (sold separately). Light tabs are welded to this heavy duty motorcycle carrier, and the wiring can be run through pre-drilled tubing to protect it from the elements. Includes a 3-year warranty.
Need a class III, IV, or V hitch for the Deluxe Heavy Duty Cam-Loc Motorcycle Carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!
Click the pictures below to enlarge
NOT recommended for use with hitch extensions. Please check set up and hitch rating before using with 5th wheel trailers and camping trailers.
Heavy Duty Motorcycle Carrier features:
Works with Class III or greater 2" receiver hitch - must be frame mounted, class IV or V preferred
Holds bikes up to 800 lbs.
Center of hitch pin hole to center of channel: 25"
Tie down bars: 36" long
Overall length: 84"
Durable welded steel construction
Includes 7' loading ramp
Powder coated black finish
No assembly required
3 year warranty
Tie Downs sold separately
Heavy Duty Motorcycle Carrier limitations:
Carrier Carrying Capacity: The JH05 carrier is designed to safely carry 800 lbs.
Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs. Most Class IV hitches are rated for 1000 lbs
Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
Will not work with class II or smaller receivers
Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
Please check with your dealer to find out if your vehicle's carrying capacity
Please check set up and hitch rating before using with 5th wheel trailers or camping trailers
NOT recommended for use with hitch extensions
NOT recommended for scooters over 300 lbs because of rear weighted composition
Silent Hitch Pin: For Class III & IV hitches - Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock
1 inch ratchet strap tie down kit for pick up trucks and trailers- 13 piece kit - Color: Red
(4 ratchet straps- 4 cam straps - 4 soft loops - 1 storage case)
2 inch strap tie down kit for pick up trucks and trailers - 8 piece kit (2 cam straps- 2 ratchet straps- 4 soft loops) (Click here for more strap info)
**Always use safety straps and follow manufacturers loading guidelines for the motorcycle hitch carrier and hauling capacities of your tow vehicle. Discount Ramps .Com LLC assumes no liability whatsoever for damage or injury incurred during the use of this product.**
Items: ( ) | Total: 
Confidently haul bikes up to 800 lbs with the durable, stable, Heavy Duty Cam-Loc motorcycle carrier. This motorcycle carrier is constructed of black powder coated all welded steel, with larger diameter cross brace tubing for an extra sturdy design. Two 36" tie down bars provide 4 tie down points and the wider design provides more stability for larger bikes. This heavy duty motorcycle carrier also includes an integrated cam lock device that eliminates hitch wobble. This system works by pulling a small wedge from behind the hitch forward to eliminate the extra space and create a tight fit. 
