 
The Gun Boot 6.0 provides the most interior room of the Kolpin gun boots. There is plenty of room for firearms up to 51" long as well as large scopes and pistol grip style stocks. Its hinged hatchback opening makes it easy to access your gun, and has a snap close cover with locking capability. The hard case is easy to carry, with its ergonomic handle and attachment points for a sling. The Kolpin Gun Boot 6.0 works with both right and left hand bolt action rifles and shotguns and has ample room for 50mm scopes and attached slings. Impact or Transport models are available. The Gun Boot 6.0 Impact includes a shock-absorbing foam and nylon liner, providing the ultimate interior protection. The Gun Boot 6.0 Transport has a soft carrying case that fits into the hard case rather than the Impact liner. The soft carrying case has a spacious interior with two layers of dense closed cell foam, a durable Cordura exterior, and a full length zipper. The Kolpin Gun Boot 6.0 can mount to your ATV or UTV with a gun boot bracket, sold separately.
- Polyethylene hard case has ergonomic handle
- Molded in attachment points for sling
- Hinged hatchback cover snaps close, has locking capability
- Accommodates right and left hand bolt action rifles & shotguns
- Room for the largest scopes, attached slings, pistol grip stocks
- Mounts to ATV or UTV with Gun Boot bracket (sold separately)
- Not compatible w/ Kolpin UTV specific mounts (20036 & 20129)
- Compatible w/ the Utility Gear Rail System for use on your UTV
(Sold separately, requires Boottector Bracket or Double Gun Boot Mount)
|
- Removable shock-absorbing foam and nylon liner
- Spacious soft carrying case that fits into hard case
- Soft case has Cordura exterior w/ full length zipper
- Two layers dense closed cell foam in soft case
|
Kolpin Gun Boot 6.0 Product Specifications
| Item # |
Manufacturer |
Description |
Fits |
| 20025 |
Kolpin Outdoors Inc. |
Gun Boot 6.0 Impact with removable shock-absorbing liner |
Firearms up to 51" L - Room for the largest scopes and pistol grip style stocks |
| 20020 |
Kolpin Outdoors Inc. |
Gun Boot 6.0 Transport with soft carrying case |
Firearms up to 51" L - Room for the largest scopes and pistol grip style stocks |
|
Order Here
|
Price |
|
$59.99 - $89.99 + 10 s&h
$59.99 + 10 s&h
$89.99 + 10 s&h
|
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| 20035 |
Boottector Bracket - Secures Kolpin Gun Boot to virtually any ATV rack. Fiberglass-reinforced nylon construction w/ brass insert. Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Compatible with the Utility Gear Rail System for UTVs and the Gear Lock & Load System.
Instructions (pdf) |
Enlarge Image |
+ 10 s&h
|
| 20032 |
Gun Boot IV Loop Bracket - Steel construction w/ rubber coated ring. Adjustable to multiple angles between 0° and 45°. Can be mounted to bed rail of UTV or any flat drillable surface. Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Compatible with Gear Lock & Load System.
Instructions (pdf) |
Enlarge Image |
+ 10 s&h
|
| 20029 |
Gun Boot IV One Piece Bracket - One piece polyethylene design with superior geometry. Pre-set angle is a perfect fit for intermediate and smaller ATVs. Mounts to either side of ATV rack. Fits Kolpin Gun Boot IV and Gun Boot 6.0 cases only! Compatible with Gear Lock & Load System.
Instructions (pdf) |
Enlarge Image |
+ 10 s&h
|
| 20005 |
In Bed Double Gun Boot Mount - Fits Polaris Ranger, Polaris Ranger XP, Kawasaki Mule, Arctic Cat Prowler - Carries two Gun Boot 6.0 cases in the bed of your UTV - Does not interfere with rear visibility and leaves plenty of bed space for other gear - Bed dimensions: 47.5" min - 55" max
Instructions (pdf) |
Enlarge Image |
+ 15 s&h
|
| 20010 |
In Bed Double Gun Boot Mount - Fits Yamaha Rhino, Polaris Ranger 400, Kymco UXV, Kawasaki Teryx - Carries two Gun Boot 6.0 cases in the bed of your UTV - Does not interfere with rear visibility and leaves plenty of bed space for other gear - Bed dimensions: 43.5" min - 48.5" max
Instructions (pdf) |
Enlarge Image |
+ 15 s&h
|
| 26200 |
Kolpin UTV Gear Transport System
Provides a flat mounting platform for accessories to be mounted to a UTV roll cage - Adjustable base locks in every 15° - Heavy duty mounting bands w/ rubber inserts fit round roll bars from 1.25" to 2" diameter
UTV Gear Transport System Product Details |
Enlarge Image |
+ 9 s&h
|
|
Powersports
Wheelchair / Mobility
Pet
Vehicle Cargo
Recreation / Storage
Commercial / Utility
Pickup Truck