 
These Race Ramps low profile car ramps for low clearance vehicles are the car ramp for the sports car enthusiast. These ramps were designed with a gradual incline to meet the clearance needs of vehicles like the Corvette C5's and Corvette C6's, Dodge Viper, Porsches, Ferrari, and the new Mustang without the need for extensions like other car ramps. These unique car ramps come in two sizes. The low profile race ramps have no sharp edges that could scratch your cement or painted floor and they will never rust. These ramps are manufactured from polystyrene and encapsulated with a high performance polyurethane which means they are lightweight (only 10 lbs each) and allow each ramp to hold 1500 lbs. These low profile car ramps come with straps for easy carrying so you can hang them up in the garage. If you have a low profile sports car like a Chevrolet corvette, the race ramps can quickly and easily give you access to the under body to change your oil, check the transmission, or simply inspect the underbody of your precious sports car. These low profile car ramps will not slide while you are driving your car onto them and have proven to be skid free on most surfaces. If this is not the car ramp you are looking for, then check out our complete line of car ramps.
Low Profile Car Ramps Image Gallery

- Lightweight but strong - A pair holds up to 3000 lbs
- 100% solid on all planes - Solid core
- Built of one solid piece making them durable and sturdy
- Will work on any level surface and are easy to drive onto
- Will not damage your hot asphalt, cement, or painted floors of your garage
- Will accommodate sports cars with wide tires
- Low profile car ramps are ideal for use with low ground clearance vehicles like Corvettes
- Check out our new Show Ramps
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Race Ramps Product Specifications
| Item # |
Manufacturer |
Description |
Dimensions |
Loading Angle |
Weight |
Image |
Race-R (RR-56) |
Brute Industries |
Race Ramps low profile car ramps for standard sports cars - 1 piece |
56" long x 12" wide x 8" tall |
10.75 degrees |
10 lbs each |
 Enlarge Image |
| RR-56-2 |
Brute Industries |
Race Ramps low profile car ramps - 2-piece ramps detach to allow more creeper space |
56" long x 12" wide x 8" tall |
10.75 degrees |
10 lbs each |
 Enlarge Image |
Race-R-XT (RR-XT) |
Brute Industries |
Race Ramps Extra Tall / Wide low profile car ramps for sports cars with low clearances - 1 piece |
67" long x 14" wide x 10" tall |
10.75 degrees |
15 lbs each |
 Enlarge Image |
| RR-XT-2 |
Brute Industries |
2 Piece Race ramps Extra Tall / Wide low profile car ramps for sports cars with low clearances |
67" long x 14" wide x 10" tall |
10.75 degrees |
18.5 lbs each |
 Enlarge Image |
|
Order Here
|
Price |
|
$203.99 - $334.99 + FREE Shipping! ***1 Week Lead Time***
$203.99 + FREE Shipping! ***1 Week Lead Time***
$228.99 + FREE Shipping! ***1 Week Lead Time***
$292.99 + FREE Shipping! ***1 Week Lead Time***
$334.99 + FREE Shipping! ***1 Week Lead Time***
|
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| RR-EX-12 |
Ramp Extensions to be used with Race Ramps - Race-R 45" long x 12" wide - incline down to 6° |
 Enlarge Image |
+ FREE Shipping!
|
| RR-EX-14 |
Ramp Extensions to be used with Race Ramps - Race-R-XT 45" long x 14" wide - incline down to 6° |
 Enlarge Image |
+ FREE Shipping!
|
| RR-WC |
(4) Race Ramps Rubber Wheel Chocks Prevents vehicle from moving while stationary to avoid injury and property damage Rubber Wheels Chocks Product Details |
 Enlarge Image |
+ FREE Shipping!
|
| RR-RMAT-6 |
Racer Mat - Padded shop mat to lie or kneel on while working on vehicles. Dimensions: 64" L x 24" W x 2" H Garage Floor Mat Product Details |
 Enlarge Image |
+ Free Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs 4" Flat Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs 4" J-Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Winch Strap with Chain Anchor Product Details |
 Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Flat Hook Tie-Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 3" Trailer Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 5lbs 3" Flat Hook Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 18lbs 3" Ratcheting Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load) 20" Long Soft Loop Product Details |
 Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" Heavy Duty Load Binder Product Details |
 Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap 2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load Axle Tie Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook 2" Swivel Combination T-J Hook - 11,700 lb Rating Auto Combo Hook Product Details |
 Enlarge Image |
+ 5 s&h
|

|
|