Keep your pets safely in the back of your car, SUV or van with our new mesh surface pet barrier. Easily adjusts to fit the height and width of your vehicle. Installs with no drilling or tools.
Install this mesh-style vehicle pet barrier in the rear of many different vehicles to keep your four-legged friend in the back. The mesh pet barrier is easy to install and even easier to take out.
The bottom rubber "cups" are the base of the vehicle pet barrier and the finger tip adjustments bring the mesh part of the barrier up to the top of your seats. Once secured, adjusting the width is as simple as turning a couple plastic knobs and moving two metal sides to get the most coverage.
The mesh-style pet barrier is made of high quality steel with a black finish. The width adjusts from 44-3/4" - 58-1/2" and adjusts from 26" to 46" tall. Every mesh pet barrier comes with a one year warranty.
VERY PLEASED WITH THE PET BARRIER PURCHASED . EASY TO ASSEMBLY , STURDY AND PRICED OK
I am a single mom with two kids and two big dogs (75+lbs) and two kids. Prior to installing this barrier, the situation in my car was chaotic and unsafe for everyone involved! I was able to assemble it myself (without tools) in less than a half hour, and it only took 5 minutes to install in my car ( Honda CRV). The poles easily adjust for a nice snug fit that holds up to the pressure of the big dogs. Everybody's happy, especially me!
I bought this for a Jeep Cherokee so I could ride my hundred and ten pound lab around with a back door open while mowing grass around my small town, pulling a lawn mower trailer.
Just installed my new pet barrier in my Honda CRV and only took 15 minutes. It is strong and occupies very little cargo space. Thgis is perfect to handle my 80 lb. Coon Hound, well made.
I've used for two out of my 3 dogs. (lab mixes). Works good. Assembly was a little confusing but it worked out. Fits pretty well in my 2014 Ford Escape in the far back. Haven't tried it in behind the front seats yet. Would probably fit better there, roof less slanted.
I have recently purchased the product. I don't have a long history of using this product. So far, it has served its purpose which is preventing my Rottweiler puppy from coming to the front seat. It was relatively easy to assemble and install.
After I put together it installed very easily in the truck very pleased with quality and a fraction of cost of one from Subaru
The product is made well. The rubber guards are a little tough to put on the top bars. It fit across the truck (Chevy Silverado) well, the height was a little short (placed on floor) but could be blocked up. We used small bungee cords to stabilize by attaching it to the hand grasps. Overall like it - keeps dogs from climbing over or thru seats
Well made, easy to assemble, but not really made for my particular application. I am using it to keep my dog in the back seat of an extended cab truck and since it is more designed for a SUV I had to make a couple of modifications moving the lower legs to the top and adding my own lower legs. Now it goes from floor to ceiling. Once done it works perfectly, dogs happy, I'm happy
Easy installation. Our Suburban is a lot more habitable now. Our English now has his space and we have reclaimed ours.
Good quality, all pieces shipped. Instructions could be clearer, and, like other reviewers, I found that it worked better when installed upside down. Dog seems content, and I am happy to know she is safe back there.
Doggie Blockers Adjustable Mesh Pet Barrier - 18" Mesh Height #07726 The item worked fine with some additional wood blocking to prevent it from sliding out of place. It was shipped lacking one foot, but I got around that by drilling a hole in the wood blocking. Fits well and stays in place!
Awesome product- instructions could have been a little more clear with picture steps but wasn't that hard to figure out. Glad we got it
I bought a new RAV4 and wanted to keep the dogs out of the front seats before they messed them up. I first installed the barrier behind the back seats with the seats upright. It worked fine, but I realized the space might be a little small for our two medium-size dogs. I then folded the back seats forward and installed the barrier on the back of the flattened seats. This also worked well. Because the wire mesh is only 18" tall and fixed near the top of the vertical supports, I needed to close the space between the bottom of the barrier and seats. I just happened to have a leftover piece of thin plywood (1/8" flooring) which was 18" x 48", the perfect size. I attached it to the barrier with two twist ties and it works great!
Perfect to keep our boxer dogs in the back of our 2013 explorer
We bought this to keep our 70 pound mountain dog in the very back of a 2014 Ford Escape. Directions were simple (except I didn't notice part of the product, the pole inserts, were already assembled, and there were 2 parts that looked like doorstops which had not directions for). It took about 15 minutes together and put in place. The rollers for tightening are great. Only thing I would recommend is that you test your puppy out first - mine threw up twice on our hour trip through the winding hills, but luckily we had a Cargo mat installed and it saved the back of the car. I foresee this lasting a long time as it is very solid and seems of great quality.