Moover™ Mobility Carrier

An all new fixed platform mobility carrier from Lets Go Aero, the Moover™, secures to the hitch receiver on your vehicle to transport mobility scooters, wheelchairs, & power chairs. A large platform with an ample 32" of width allows you to easily walk your mobility equipment up the ramp for transport. The solid ramp features two heavy-duty strips of grip tape for added traction in any condition making loading a lot easier. The hinged ramp folds flat onto the carrier when not loaded, upright when loaded, or extended when loading. The overall dimensions of the Moover™ mobility carrier are 48" long x 32" wide x 7" high with a 43" long x 30" wide attached ramp and a total weight capacity of 300 lbs The carrier's hitch tube has two pin holes from which to choose. The two holes are there to allow for more installed clearance if needed. From the hitch pin hole to the basket, the clearance is 5" or 7", depending on which hole is used. From the hitch pin hole to the end of the carrier, the distance is 39" or 41", depending on which hole is used.

Moover™ Mobility Carrier Image Gallery

Moover™ Mobility Carrier Product Features:

• Super durable and strong cold rolled steel
• Fixed platform with hinge-attached ramp
• Powder-coated & E-coated black for a long-lasting finish
• Heavy Duty anti-skid grip tape surface on ramp and carrier
• Ramp lies flat or upright when not in use or extended for loading
• High side rails keep your scooter/mobility vehicle on the carrier
• Includes a Silent Hitch Pin for added stability
• Fits into Class III & IV - 2" receivers
• 1 Year Warranty
• Assembly Required
• Instructions

Moover™ Carrier Product Limitations:

• Carrier Carrying Capacity: This carrier is designed to safely carry 300 lbs
• Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs Most Class IV hitches are rated for 1000 lbs
• Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
• Will not work with class II or smaller receivers
• Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
• Please check with your dealer to find out if your vehicle's carrying capacity
• NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers

Recommended Accessories

Item #	Description	Image	Price
ANTI-TILT-REV	Anti-Tilt Locking Device - For Class III or larger trailer hitches. Pinches main tube of tow accessory tight into trailer hitch to eliminate rocking View More Details	Enlarge Image	+ free s&h
Retractable-Strap	(1) Retractable Ratcheting Strap with S-Hook Ends (each) view more information	Enlarge Image	+ 6 s&h On Back Order Until Mid April 2012
SHP-2030	Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock For Class III & IV hitches	Enlarge Image	+ free s&h
AL100-Cover	Heavy Duty Scooter Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover. Size of cover is 33" tall x 28" wide x 55" long. View More Information	Click to view cover	+ free s&h
AL500-Cover	Heavy Duty Power Chair Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover with four slits in each corner of the cover to accommodate the four tie down straps. Size of cover is 38" high x 23" wide x 44" long. View More Information	Click to view cover	+ free s&h
VH-MStrap-C	1 inch wide cam buckle strap tie down kit (4 cam buckle straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
VH-MStrap	1 inch wide straps. Kit includes:(2 cam buckle straps + 2 ratchet straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
VH-MStrap-R	1 inch wide ratchet strap tie down kit (4 ratchet straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
HP31	Locking Hitch Pin for 2" Class III and IV receivers - 5/8" x 2-3/4"	Enlarge Image	+ free s&h
A20402	Standard Hitch Pin for 2" Class III and IV receivers - 5/8" x 4-3/4"	Enlarge Image	+ free s&h