The Black Widow High Rise is a high quality motorcycle lift table designed to lift motorcycles, ATVs, and lawn tractors weighing up to 1,500 lbs from 8-1/8" to 45" high off the ground for service, maintenance, cleaning, and off-season storage. An air operated pneumatic foot pump simplifies the process, allowing the table to lift by the press of a pedal. Heavy duty 2" caster wheels on the bottom frame then allow the motorcycle lift table to dolly around a workshop with ease.
The center platform measures a large 101"L x 29-3/4"W and includes two removable 10-1/2" W x 88-1/2" L side panels. Includes a specially designed 24-3/4" L x 50-3/4" W two part ramp stand specifically designed for ATV or lawn tractor approaches, and a 10-3/4" W x 36-1/4" L center approach ramp for motorcycles. The large surface area platform and ramps are constructed from heavy duty diamond plate for optimal traction and stability. For safety, the Black Widow High Rise motorcycle lift table features a handle operated cable locking plate with 7 positions designed to hold the motorcycle lift secure in place without the risk of slipping during use.
To secure a motorcycle in place on the lift, place the front motorcycle wheel in the center wheel chock and hand-crank the wheel chock closed. The motorcycle wheel chock adjusts from 2" to 7-3/4" wide to fit a wide variety of motorcycle wheels and features a 1/4" thick hard rubber padding to protect motorcycle tires while secured. The 1/8" thick, 7-3/4" W x 7-3/4" L wheel stop helps ensure the motorcycle does not go too far past the wheel chock. Please make sure to grip as much rubber of the motorcycle wheel as possible to ensure vital components such as the brake rotor are not damaged. It is recommended to have at least a 5" clearance height on any motorcycle, ATV, or lawn tractor being loaded on the Black Widow Motorcycle Lift. Please measure the length and clearance height of your motorcycle, ATV, or lawn tractor before purchasing.
Black Widow High Rise Lift Table Image Gallery
- Lifts motorcycles, ATVs, & garden tractors off the ground from 8-1/8" to 45" high for maintenance and storage
- Center position 2" to 7-3/4" adjustable width wheel chock with 1/4" thick hard rubber padding
- Angled 7-3/4" W x 7-3/4" L x 1/8" thick wheel stop
- Diamond-plate, 1-3/4" high, reinforced platform deck with 3" W supports
- (2) Removable side panels each 88-1/2" L x 10-1/2" W
- Handle operated 7-position safety locking system
- Dual pedal controlled air operated pneumatic foot pump
- Flexible 46" L pneumatic pump hose
- (2) Front eyelet bolts for strap tie-down
- (4) 2" Heavy duty smooth gliding caster wheels designed for indoor/shop dolly
- Great for motorcycles and ATVs - up to a 1,500 lb capacity
- 19-1/4" W x 21-3/4" L rear access panel opens for a 17" W x 21" L work area
- Requires 90-100 psi minimum air pressure & 120 psi maximum
- Minimum 6.7 gallon / minute air compressor is recommended
- 5" recommended ground clearance for ATVs, motorcycles, and lawn tractors
- One year warranty
- Featured review in Wing World Magazine
- Foot Pedal Instructions
Black Widow Premium ATV / Motorcycle Lift Table Product Specifications & Price
||Rage Powersport Products
||8-1/8" to 45"
||26-1/4", 30-1/4", 33-1/4", 36-1/2", 39-1/8", 41-1/2"
||Lift Weight: 740 lbs
Shipping Weight: 766 lbs
||Platform Only - 88.5"
Platform & Chock - 101"
Overall w/Load Ramp - 144.5"
View Our Other Popular Motorcycle Products