Black Widow ProLift Heavy-Duty Pneumatic Motorcycle Lift Table - 1,500 lb Capacity

With the ProLift Heavy-Duty Pneumatic Motorcycle Lift Table from Black Widow, it’s never been easier to service Harleys, cruisers, and other large bikes weighing up to 1,500 lbs from the convenience of your own garage. The 105-1/2" extra-long table features an integrated, adjustable wheel clamp to keep your bike upright and secure, and comes with a free lift jack and rear drop-out panel to make tire repairs and maintenance a snap.

  • Perfect for any size bike weighing up to 1,500 lbs.
  • Foot pedal-operated using a deluxe air hydraulic pump
  • Extra-long 105-1/2" table
  • 90 - 110 psi air pressure required
  • 31-1/4" maximum lift height
  • Rear drop-out panel to easily service rear wheel
  • Adjustable front wheel clamp fits tires up to 7-3/4" wide
  • Side extension kits available for wider vehicles
  • Includes free lift jack for servicing tires
$849.99
BW-PROLIFT-HD
$250.00
Ships today!
Ships on pallet via truck frieght. Includes FREE lift gate service on delivery!
1 Year Warranty

Keep your fully-dressed Harley, touring bike, chopper, or other large motorcycle in tip-top condition by performing routine maintenance, service check-ups, and oil changes from your own garage with this Black Widow Motorcycle Lift Table. Powered by compressed air (90 -110 psi required), this 105-1/2" long heavy-duty motorcycle lift table effortlessly raises any motorcycle weighing up to 1,500 lbs from 7" to 31-1/4" off the ground, to provide you a better angle for servicing and cleaning your bike. Enjoy the convenience of working on your pride and joy in your own shop while saving valuable time and money in the process!

We have outfitted this pneumatic motorcycle lift with an oversized front tire wheel clamp and a full set of safety features to make it as easy as possible for you to load, secure, and lift your bike all by yourself. Use the 20" removable approach ramp to load your motorcycle safely, then push the bike all the way into the adjustable wheel clamp to keep it upright while you tighten the wheel vise and attach safety straps from your motorcycle to the lift table’s built-in tie-down points. A foot pedal attached to an air compressor (not included) provides hands-free operation.

Make adjustments to the table-lowering speed using the bolt and washer located on the foot pedal, and use the locking bar to stabilize the table at one of eight heights from 19" to 31-1/4" off the ground. When your motorcycle is loaded and raised to the appropriate level for making repairs, remove the 20-1/8" by 12" drop-out panel to provide easy access for servicing the rear tire, sprockets, and drive shaft. Replace the drop-out panel with our optional Roller Plate (sold separately) to spin the rear tire freely for general maintenance such as oiling the chain or cleaning the rims. During the off-season, use this Black Widow motorcycle lift table for storage and prevent flat tire spots by keeping your bike off wet pavement. Heavy-duty steel wheels at one end of the lift table allow you to maneuver it conveniently around your shop or garage like a dolly – even when it’s supporting a 1,500-lb motorcycle.

Motorcycle Lift Jack

Easily raise the front or rear tire of your bike with the included Motorcycle Lift Jack. The Motorcycle Lift Jack includes a set of 3-1/2" and 5-1/4" interchangeable supports topped with rubber to grip the bike's frame and prevent scratches. Use the hex head socket handle to raise and lower the scissor jack, and lock it in place using a handy six-position safety locking system.

Optional Extension Kit

For those who would like to service ATVs, lawn mowers, snowmobiles, and more using the ProLift pneumatic motorcycle lift, check out our optional Side Extension Kit (sold separately) that increases the table’s width by a full 12" on each side.

We are so confident that you’ll find our Black Widow Heavy Duty Motorcycle Lift Table and its full set of built-in loading and safety features superior to any comparable lift on the market, that if you are not 100% satisfied for any reason, you can return it to us within the first 30 days for a full refund! (Excludes shipping)

Please measure the length of your motorcycle before purchasing.

1,500 lbs
24"
105-1/2"
20"
Pneumatic - uses compressed air
Included
Yes
Yes - adds 24" to table width
Yes
Included
Available
350 lbs
7"
31-1/4"

Product Features

  • Interchangeable 3-1/2" and 5-1/4" supports
  • Rubber padded support tops provide grip and prevents scratching the bikes frame
  • Hex head socket handle for raising and lowering
  • Designed for lifting the front or rear tire, not both
  • Six safety locking position system
  • Steel construction with an orange powder coat finish

Documents

Instruction Manual

Review Summary (Based on 3 Reviews)

Reviews

5 Stars Great lift for the price

Doug White from AZ wrote (July 06, 2015):

This is a great lift very little assembly needed. Customer service is great I had a problem with the tire clamp just had to call them up tell them what I needed and it was shipped out no questions asked.

5 Stars Great Lift table

Darryl G. from GA wrote (January 23, 2015):

I received my new lift table with side extensions 3 days after I ordered it. There was very little assembly required. It looks great and works great. Well worth the money and I would highly recommend this product to anyone.

5 Stars Best LIFT ever

Robert Chop from CT wrote (July 01, 2014):

I have received my lift with in a week. Well packaged and professional delivery. Looks great and works even better than it looks. It sure is a different level of quality from the Harbor freight one I was considering. Well worth the money and the company was easy to work with. I also got the side extensions. I highly recommend this product to anyone.