Service or repair your car or truck easily with the inexpensive pickup truck ramp. Made of strong steel, these truck service ramps hoist your vehicle 7½" off the ground with a 2½" lip stop to prevent run-off. Each pickup truck ramp features a frame style construction painted blue and a diamond plate surface at the bottom for added traction. Steel cross beams allow your tires to drive on with minimal slipping. Load your truck or car up on to these car repair ramps with a 4400 lb. capacity (2200lbs. each). Overall dimensions of the pickup truck ramp are 31½" long x 11½" wide x 10" high and usable dimensions are 30" long x 8" wide x 7½" high. Each pair of truck service ramps come with a 1 Year Warranty.
Click the Pictures below to enlarge
- 4400 lb. Capacity per pair or 2200 lbs. per Ramp
- All Steel construction w/ diamond plate pattern on bottom
- 2½" lip prevents the car from running off the end
- Lifts the front or rear of a car 7½"
- Quicker than jacking up the vehicle, just drive on
- Track Dimensions - 30" long x 8" wide x 7½" high
- Overall Dimensions - 31½" long x 11½" wide x 10" high
- Lightweight frame design - ramp only weighs 14lb. each
- 1 Year Warranty
Please measure the width of your tires for proper fitment
| Model # |
Description |
Overall Dimensions |
Capacity |
Weight |
Price per Pair |
| 6003B |
(2) Fully Welded Steel Construction Pickup Truck Ramp
Painted Blue |
31.5" long x 11.5" wide x 10" high |
4400 lb. Capacity
(2200 lbs. each) |
14 lbs. each
28 lbs. |
+30 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
