 
The portable pit stop ramp by Race Ramps is a multi-purpose ramp that is able to be used for pit crew work, normal maintenance or displaying your vehicle. Each side of the ramp weighs a total of 175 lbs with no removable part weighing over 40 lbs The pit stop ramp has an angle of 10 degrees and raises the vehicle 14" high. The car platform is able to accommodate a wheel base from 98" to 110" wide. There are two models of the portable pit stop, a standard model and a racer model. The racer model have removable cutouts large enough to fit a scale that is 15" wide and 2.5" tall while the standard does not have cutouts. Both models were constructed of a light weight polystyrene material that is slip-resistant and will not scratch or dent the surface it is on. When not in use this pit crew ramp can be stacked in a 65" high space for storage. The portable pit stop ramps are made in the USA and come with a 1 year manufacturer warranty.
If this is not the car ramp you are looking for, then check out our complete line of car ramps
Portable Pit Stop Ramp Image Gallery
- Made of light weight & sturdy material
- Can be used on almost any surface
- Can be stacked in a 65" high space for storage
- Multiple uses
- Race Model Has cutout for scale
- 1 Year Manufacturer Warranty
- Made in U.S.A.
- Instructions
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Portable Pit Stop Ramp Product Specifications & Price
| Item # |
Description |
Dimensions |
Ramp Loading Angle |
Weight |
Weight Capacity |
Price |
| RR-PPS |
Portable pit stop ramp - Standard Model no Cutouts |
14" High x 98" to 110" Long |
10 degrees |
175 lbs per side |
6,000 lbs per pair |
+ freight
Shipping Quotes & Ordering
Call Toll Free 1-888-651-3431
|
| RR-PPS-R |
Portable pit stop ramp - Racer Model with Cutouts |
14" High x 98" to 110" Long |
10 degrees |
175 lbs per side |
6,000 lbs per pair |
+ freight
Shipping Quotes & Ordering
Call Toll Free 1-888-651-3431
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| RR-WC |
(4) Race Ramps Rubber Wheel Chocks
Prevents vehicle from moving while stationary to avoid injury and property damage
Rubber Wheels Chocks Product Details |
Enlarge Image |
+ FREE Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 14 lbs
4" Flat Hook Ratchet Strap Product Details |
Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs
4" J-Hook Ratchet Strap Product Details |
Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
4" Winch Strap with Chain Anchor Product Details |
Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
4" Flat Hook Tie-Down Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
3" Trailer Cargo Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 5lbs
3" Flat Hook Cargo Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 18lbs
3" Ratcheting Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair)
2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair)
2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps
Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load)
20" Long Soft Loop Product Details |
Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder
9200 lb Capacity / 33,000 lb Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2"
Heavy Duty Load Binder Product Details |
Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap
2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load
Axle Tie Down Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook
2" Swivel Combination T-J Hook - 11,700 lb Rating
Auto Combo Hook Product Details |
Enlarge Image |
+ 5 s&h
|
|
Powersports
Wheelchair / Mobility
Pet
Vehicle Cargo
Recreation / Storage
Commercial / Utility
Pickup Truck