Portable Pit Stop

Race Ramp's Portable Pit Stop is ideal for mechanical work, displays, detail work or general maintenance of your vehicle. This pit stop ramp is available in two models, the standard model and the racer model that has removable cutouts that can fit a scale that is 15" wide & 2-1/2" tall.

1 Year Warranty USA
Item # Description Length Width Height Availability Price
RR-PPS Portable Pit Stop Ramps - Standard Model with No Cutouts 110" 98" 14"
In Stock. Ships Directly from Manufacturer.

RR-PPS-R Portable Pit Stop Ramps - Racer Model with Cutouts 110" 98" 14"
In Stock. Ships Directly from Manufacturer.

For shipping quotes and ordering, call us toll free at 1-888-651-3431


The portable pit stop ramp by Race Ramps is a multi-purpose ramp that is able to be used for pit crew work, normal maintenance or displaying your vehicle. Each side of the ramp weighs a total of 175 lbs with no removable part weighing over 40 lbs The pit stop ramp has an angle of 10 degrees and raises the vehicle 14" high. The car platform is able to accommodate a wheel base from 98" to 110" wide.

There are two models of the portable pit stop, a standard model and a racer model. The racer model have removable cutouts large enough to fit a scale that is 15" wide and 2-1/2" tall while the standard does not have cutouts. Both models were constructed of a light weight polystyrene material that is slip-resistant and will not scratch or dent the surface it is on. When not in use this pit crew ramp can be stacked in a 65" high space for storage. The portable pit stop ramps are made in the USA and come with a 1 year manufacturer warranty.

If this is not the car ramp you are looking for, then check out our complete line of car ramps

10 degrees
6,000 lbs per pair
175 lbs per side

Product Features

  • Made of light weight & sturdy material
  • Can be used on almost any surface
  • Can be stacked in a 65" high space for storage
  • Multiple uses
  • Race Model Has cutout for scale
  • Made in U.S.A.
  • 1 Year warranty

Warning and Usage Guidelines

  • Before using the ramps ensure other persons are clear of the vehicle and the ramps
  • Ensure that the ramps are free from damage or corrosion before use.
  • Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
  • Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
  • Carefully drive the vehicle onto the automotive ramps until it is in the correct position
  • Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
  • Before starting work, walk around the vehicle ensuring it is securely positioned
  • Always use jack stand if a person will be going under the vehicle
  • On completion of the work, check the parking brake is still firmly on and remove the chocks
  • It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
  • Exercise caution when using these car ramps with a trailer or three wheeled vehicle


Instruction Manual

Review Summary