Silver Spring Power Chair Transport Cover
$99.99
CVR-WC-4S

Ships today!

Superior Protection of your Power Chair

Protect your power chair from dirt, debris and the elements during transportation with the exclusive Silver Spring Heavy Duty Power Chair Cover. Made from lightweight, durable, nylon this cover features four slit openings for tie downs to keep the cover in place, even at highway speeds. This ensures that while your power chair is properly secured to your vehicle the cover will stay in place, effectively protecting your chair. Measuring 38"H x 23"W x 44"L, this water-resistant cover is proudly manufactured in the USA.

Features and Benefits

  • Durable, lightweight nylon fabric protects from rain, sun and debris
  • Designed for transporting power chairs
  • 4 Corner slits with Velcro and buckles allow for tighter fit when using tie down straps
  • Measures 44"L x 23"W x 38"H
  • Two tie down straps buckle across bottom of carrier to hold mobility cover in position
  • Reflective tape for increased visibility

Extend the Life of your Power Wheelchair

Each corner opens with a 10-1/2" Velcro slit so the cover may be secured over the carrier tie downs for a tighter fit; plastic buckles at the corners keep them closed. The cover has two 1" wide, built-in tie down straps with plastic buckles to secure across the bottom of the carrier, holding the cover in place. Four additional nylon loops on each side give you the option to strap the cover down at additional points. A reflective strip on the back makes the scooter cover more visible in low-light situations.

44"
23"
38"

Product Features

  • Water-resistant cover protects powerchair from weather and dust
  • Designed for transporting power chairs
  • Includes 4 slits in each corner to accommodate 4 tie down straps
  • 6 month warranty
  • Made in the USA

Warning and Usage Guidelines

  • Power Chair Mobility Covers are not intended for highway use without using a securing device such as rope or cords over the top and through the tiedown loops. This will reduce the amount of excess room under the cover and prevent billowing at high speeds

Review Summary (Based on 16 Reviews)

Reviews

5 Stars CVR-WC-4S wheelchair cover

Jennifer Torres from MN wrote (September 04, 2016):

Excellent my made heavy duty wheelchair cover. Easy to use. Awesome!

5 Stars CVR-WC-4S Power Chair Cover

Teresa Tost from MO wrote (July 25, 2016):

Was very glad to get this for our chair and was glad of how strong of material the cover was made with.

5 Stars Power chair Cover

Jim L. from NM wrote (April 27, 2016):

This cover is everything that it was advertised to be. I would diffently recommend this cover to anyone that wants or needs a cover for their power chair.

5 Stars Repeat Customer

james from WV wrote (January 26, 2016):

I like the style and ease of use. I have no worries of the cover coming off no matter how strong the wind. The cover keeps all types of weather off the motorized wheelchair. I would recommend this product to anyone. It is used a lot and is very reliable.

5 Stars Chair Cover

Pete from NH wrote (November 19, 2015):

I bought this to cover my wheelchair on the back of my minivan. This is very sturdy and much better than grill covers that I have bought in the past. The built in clips are much easier than trying to use bungee cords to hold it around the wheelchair. I recommend this product.

5 Stars Great Cover

Chris from TN wrote (November 09, 2015):

This cover exceeds my expectations. It appears very durable and fits my scooter perfectly. And it is made in the USA!

5 Stars chair cover

Leo Stock from PA wrote (September 18, 2015):

Finally found a cover that works and does a great job 5 stars thanks

5 Stars bmg00144

Bernie from FL wrote (August 01, 2015):

I live in south fl. and if you know anything about FL. You know it rains every day all summer lone. Thay say if you don't like the weather just hang out for about 10 min. it will chang. Or if you don't like the rain just cross the street. thank for the great powerchair cover. No more wet butts!!

5 Stars cover for wheelchair

Ed from MS wrote (July 15, 2015):

This cover feels like a good quality product. Easy to install and provides good protection

4 Stars CVR-WC-4S

Gary F. from TX wrote (May 15, 2015):

I brought this powerchair cover based on the reviews. I would have rated it 5 stars however during the first time I used it the long straps ripped off the cover. I called customer service and provided pictures. They had a new one in the mail the next day. I would recommend reinforcing the straps and ensure you use bungee cords to help keep the cover from flapping. I would recommend this to my ffriends.

5 Stars Great service

Jeffrey from MO wrote (May 15, 2015):

I recently purchased a cover for my wife's chair, and a week later, it arrived. It is of quality that I needed and expected. Thank you

5 Stars The quality of the material is excellent!

Martha E. Valenzuela from TX wrote (May 13, 2015):

The material has proven to be resistant against rain, the sun rays which is what I was most worried about.

5 Stars Cover

Kathy from NC wrote (May 04, 2015):

I just got the cover for my Powerchair. I really like it. It covers my chair the way I like it.

4 Stars Wheelchair cover

sharon from TX wrote (May 01, 2015):

heavy duty and large enough to cover my wheelchair

5 Stars Powerchair Cover

Ted from CA wrote (January 12, 2015):

The wheelchair cover is of high quality material, water resistant, and easy to place over the wheelchair.

5 Stars Quality Product

Bryan Lay from IN wrote (January 09, 2015):

This cover looks and feels like a good quality product. Easy to install and provides good protection for the wheelchair.

Read All 16 Reviews...