With our deluxe carrier and cover package you'll not only be able to take your scooter or wheelchair with you wherever you go but you'll be able protect it from the elements and theft at the same time! This innovative packages includes our deluxe durable steel scooter carrier, a thick rubber mat to protect your scooter from road dirt and moisture and a lightweight pull-over cover which shields your scooter or wheelchair from the elements and prying eyes. We've also included 4 cam buckle tie-down straps in this package in order to safely secure your scooter to the carrier. A DiscountRamps.com exclusive.
Complete package for transportation and protection of your scooter
Bundle includes: SC500-V3 carrier, rubber mat and hardware, AerFoil cover and 4 tie-down straps
500 lb capacity
Cover made from lightweight but durable extruded polypropylene
Carrier weighs 86 lbs - cover weighs 36 lbs
Includes heavy duty rubber mat and installation hardware
Carrier and ramp made from black powder coated steel
Carrier includes 5/8" hitch pin, ramp, anti-wobble device
Center of Hitch Pin Hole to Back of Carrier (5/8") 13-3/8" folded 43-1/8" unfolded
11" - 18" (Less than 11" trailer hitches can purchase SC-SWING-AWAY - raises carrier 3" or 7" higher)
Safely transport and protect your mobility device from outdoor elements with the SC500-V3 kit. This bargain bundle includes the SC500-V3 Mobility Carrier, AerFoil™ Carrier Cover, Rubber Mat with installation hardware and 4 cam buckle tie downs! Everything needed to securely protect and transport your scooter or wheelchair.
The SC500-V3 X-TRA offers the necessary equipment to safely transport and protect your scooter or wheelchair at a super low price that saves you money! The SC500-V3 Bundle includes the SC500-V3 Mobility Carrier, AerFoil™ cover, Mobility Carrier Rubber Mat with stainless steel hardware and 4 cam buckle tie down straps. The SC-500-V3 features a folding design and extra long 59" loading ramp allowing the carrier to be used on most vehicles with a 2" trailer hitch. With the pull of a hitch pin your carrier can be folded up vertically to the back of your vehicle to save space when parking in garages or lots! The wheelchair and scooter carrier is constructed of steel, has a thick black powder coat finish and a colossal 500 lb weight capacity! The surface of the carrier is a sturdy, heavy duty steel mesh with 1" square support tubes underneath that will not bend or flex from the weight of your scooter or wheelchair.
The wheelchair and scooter carrier features an integrated two section ramp design which folds up and out into three different positions. The first position keeps the ramp folded flat to the carrier surface and is held down with a spring pull pin. The folded flat position is to keep the ramp self stored and secured when the carrier is folded up. The second ramp position allows the ramp to stand up straight when a mobility device is on the carrier and is held in place with two spring pins. The last position is the ramp unfolded. This position allows for scooters or power wheelchairs to be pushed or driven up the ramp. Please Note: Mobility devices are not to be occupied when loading, unloading, or on the carrier! The ramp is 27-1/2" wide by 59" long providing a gradual incline for easy loading of your mobility device. A welded handle featured on the ramp allows for easy folding and unfolding. The tray sides feature five carrying handles for easy handling when installing the device. The rear of the carrier has two reflectors for greater visibility at night. The carrier's usable dimensions are 46-1/2" long by 28" wide, accommodating almost all of today's mobility devices.
Supporting the carrier is a heavy duty 2" hitch tube which features 2 bolts and a safety pin underneath to allow the hitch tube to be removed from the carrier. Two bolts fitted underneath the folding hitch tube allow you to level the carrier so that the pin holes line up to secure the carrier in the unfolded position. The distance between the hitch pin hole and the carrier is 13-1/2" unfolded and when the carrier is folded the distance is 4-5/8". This carrier is not recommended for 1-1/4" hitches. Also available is a heavy duty anti-tilt locking device which prevents carrier wobble during transportation. The hitch tube has a 5/8" hitch pin hole for the included hitch pin and 1/2" hole for the pinch bolt (if anti tilt can not be used) for securing the carrier to your vehicle and will work on Class III or IV hitches.
Bundled with the AerFoil™ Cover, Rubber Mat (hardware included) & 4 Cam Buckle Tie Downs!Included in the kit is the AerFoil™ Scooter Carrier Cover! Constructed of lightweight extruded polypropylene Hi-Core® sheets with steel hardware, the cover is built for long-lasting protection for your mobility device and easily installs onto the carrier. The oversized front grab handle allows for accessible lifting. The heavy duty rubber latch secures the cover shut when in use and implemented safety cable prevents over tipping when opening the cover. The Rubber Mat fits snug over the racks mesh surface and installs with the included stainless steel hardware kit. The combination of the AerFoil™ Cover and Rubber Mat fully encloses your mobility device protecting it against debris, water and other outdoor elements during transport. Included Cam Buckle Tie Down Kit features 4 (1 inch wide) straps with a 1,500 lb capacity which can be hooked onto any of the 10 tie down holes featured on the 4-1/4" tall tray carrier sides.