Transform your long or short bed pickup truck into the ultimate one-man motorcycle-hauling vehicle with this “Cruiser Ramp” powered lift! Stand back and watch this extraordinary ramp system load and unload your full-size motorcycle flawlessly with the simple push of a button. A self-locking front wheel chock with ratchet tie-down straps keeps your ride secure in the bed of your truck, and the ramps are stored in holders that drop into the stake holes along the bed rail. Hauling your bike cross country has never been easier!
Compatible with full-size pickup truck beds at least 42" wide
Easy one-person operation with push of a button
1,000-lb weight capacity ramp
Includes locking wheel chock, safety chains & ratchet tie-down straps
Roller on center ramp keeps cable from rubbing tailgate
Black powder coat finish
Motorcycle Wheel Chock is a Locking Wheel Chock
Electric Winch (Terra 2500) 2,500 Pound Capacity with a 16' Heavy Duty 3/16" Cable
Outside Ramps Length = 95.25" Aluminum Ramps
5'-6" Long Bed = 65" 6'-6" Long Bed = 73.75" 8' Long Bed = 95.5"
Platform Caster Wheels is 6" x 2" Black Rubber Wheels with wheel grabbers
Take all the hassle out of transporting your motorcycle by yourself with this dependable “Cruiser Ramp” powered motorcycle lift. Simply drive the bike’s front wheel into the locking wheel chock on the system platform assembly, tie the front wheel down at the axle position using the supplied ratchet tie-down straps, activate the hand-held switch and the motorcycle is pulled into the pickup bed.
When it’s time to unload, the “Cruiser Ramp” remote-controlled mechanism gently lowers your ride from the bed to the ground without using complicated electronic switches or having to pull the bike out by hand.
Easy to install and dismantle, this motorcycle loading ramp will accommodate the standard 5'-6", 6'-6", and 8' pickup bed lengths with at least 42" clearance between the wheel wells including step-side models. This powered motorcycle loader allows a motorcycle to be loaded onto an 8' bed with or without the tailgate attached, however, the bike must be removed from the vehicle to close the tailgate on 5'-6" and 6'-6" models.
The heavy-duty ramps that guide the bike up onto the truck conveniently store within their own holders along the pickup bed rail, and the self-locking front wheel chock with ratchet tie-down straps secures your ride in place. Powered by a 3,000-lb capacity electric winch with 3/16" wire rope heavy-duty cable, this motorcycle pickup loader offers the safest and easiest way to transport your ride using your full-size truck.
Please have ready the year, make, model and bed length of the truck to be installed on when calling us toll free at 888-651-3431 Mon-Fri from 8:00am to 5:30pm CST.
Cruiser Ramp system cannot be used with the full size 2008 Ford pickup with the new tailgate design with step and flip up stabilizing handle. If using the 8 foot bed with this tailgate, the tailgate must be removed in order for the system to function properly.