The Race Ramp Solid Rack Ramps are designed to be used with service platforms or lifts to prevent damage to the front end of low-profile vehicles during loading by easing the incline from ground to platform. These car ramps are made from durable and lightweight polystyrene which will not damage your garage or cement floor.
The Race Ramp Solid Rack Ramps allow you to easily load your low-profile vehicle onto a service platform or lift without causing damage to the front end. Two different versions of this car ramp are available. The RR-RACK-4 has a notch cut out for use with lifts that have built-in ramps. When loading, the built-in ramp will rest on the notch space on the low-profile ramp, providing a gentler incline for the vehicle to ascend. The RR-RACK-5 is designed with a ledge that works well with four post lifts with removable ramps. The ledge of this ramp goes over the operating rods and cables running across the front of the steel beam of the lift. Both designs are manufactured from lightweight and durable polystyrene that will not scratch the surface of your floor. The Rack Ramps feature a textured surface to prevent the tires from slipping when loading your vehicle onto the platform. They are made in the USA and come with a one year warranty.
Rack ramps for use with service platforms
3,000 lbs (per pair)
Two models to choose from
Textured surface prevents slipping
Lightweight polystyrene material
Will not scratch floor surface
Loading Angle is 9 degrees (RR-RACK-4) 8 degrees (RR-RACK-5)
1 year manufacturer's warranty
Made in USA
Warning and Usage Guidelines
Before using the ramps ensure other persons are clear of the vehicle and the ramps
Ensure that the ramps are free from damage or corrosion before use.
Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
Carefully drive the vehicle onto the automotive ramps until it is in the correct position
Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
Before starting work, walk around the vehicle ensuring it is securely positioned
Always use jack stand if a person will be going under the vehicle
On completion of the work, check the parking brake is still firmly on and remove the chocks
It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
Exercise caution when using these car ramps with a trailer or three wheeled vehicle