Race Ramp Extension

View all Departments

Discount Ramps.Com >> Service / Repair Car Ramps >> Race Ramp Extensions

Scroll down to view specifications and pricing.

Corvette shown on race ramp ramp extensions.

These Race Ramps ramp extensions lengthen your existing Race-R or Race-R-XT ramps and drop the incline degree by 6°. This added length allows for low clearance vehicles to drive onto your Race Ramps. These ramp extensions come in two sizes for the different Race Ramp models. The extensions have no sharp edges and won't scratch your cement or painted floor. Ramp extensions are manufactured from polystyrene and encapsulated with a high performance polyurethane which means they are super light weight (only 6 lbs each) and never rust. The Race Ramp extension features stiff nylon tabs to prevent them from slipping of the ramps. If this is not the car ramp you are looking for, then check out our complete line of car ramps

Race Ramp Extension Image Gallery

Ramp Extension Ramps Product Features:

Convenient for very low profile cars
Brings the incline slope down to 6°
RR-EX-12 works on the Race-R ramps
RR-EX-14 works on the Race-R-XT ramps
Lightweight - Only weighs 6 pounds each
Check the Race Ramps you need

*Ramp Safety Warning & Usage Guidelines*

Before using the ramps ensure other persons are clear of the vehicle and the ramps
Ensure that the ramps are free from damage or corrosion before use.
Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
Carefully drive the vehicle onto the automotive ramps until it is in the correct position
Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
Before starting work, walk around the vehicle ensuring it is securely positioned
Always use jack stand if a person will be going under the vehicle
On completion of the work, check the parking brake is still firmly on and remove the chocks
It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
Exercise caution when using these car ramps with a trailer or three wheeled vehicle

Race Ramp - Ramp Extension Product Specifications & Price
Item #	Manufacturer	Description	Dimensions	Weight Capacity	Image	Price
RR-EX-12	Brute Industries	Ramp Extensions to be used with Race Ramps - Race-R	45" long x 12" wide - incline down to 6°	3,000 lbs per pair	Enlarge Image	+ free s&h
RR-EX-14	Brute Industries	Ramp Extensions to be used with Race Ramps - Race-R-XT	45" long x 14" wide - incline down to 6°	3,000 lbs per pair	Enlarge Image	+ free s&h

Recommended Accessories
Item #	Description	Image	Price
4in-Rat-Flat-Hook	4" Flat Hook Ratchet Strap with a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs	Enlarge Image	+ 10 s&h
4in-Rat-J-Hook	4" J-Hook Ratchet Strap with a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs	Enlarge Image	+ 10 s&h
18RAT-J-2	2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair)	Enlarge Image	+ 6 s&h
18RAT-S-2	2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair)	Enlarge Image	+ 6 s&h
LOAD-BINDER	Heavy Duty Load Binder - 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2"	Enlarge Image	+ 12 s&h
Strap - 2" Axle	2" x8' Ratchet Combination Tie Down with Built in Axle Strap - 11,000lb Break Strength - 4000lb Working Load	Enlarge Image	+ 5 s&h
AUTO-2-STJ	4" Combo Auto Tie Down Hook - 16,200 lb Rating	Enlarge Image	+ 5 s&h

Race Ramp - Ramp Extension