These Race Ramps ramp extensions lengthen your existing ramps and drop the incline to 6°. The added length allows low-clearance vehicles to drive onto the ramp without bottoming out. The ramp extensions are manufactured from polystyrene and encapsulated with high-performance polyurethane which means they weigh only 6 lbs each, never rust, and won't scratch your cement or painted floor. The Race Ramp extensions feature stiff nylon tabs to prevent them from slipping of the ramps.
Race Ramp Low Ground Clearance Extensions
3,000 lbs per pair
6 lbs (each)
Warning and Usage Guidelines
Before using the ramps ensure other persons are clear of the vehicle and the ramps
Ensure that the ramps are free from damage or corrosion before use.
Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
Carefully drive the vehicle onto the automotive ramps until it is in the correct position
Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
Before starting work, walk around the vehicle ensuring it is securely positioned
Always use jack stand if a person will be going under the vehicle
On completion of the work, check the parking brake is still firmly on and remove the chocks
It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
Exercise caution when using these car ramps with a trailer or three wheeled vehicle