Attaches with interlocking tabs to the Rubber cable protector to protect cables around a 22.5° curve. Can be used with multiple curve sections to create larger turns. 5 cables channels.
Curve cables around racks, poles, or other objects with these left curve sections for the 5-channel rubber cable protector. Each left turn piece attaches to the rubber cable protector with an interlocking tab connection system. The left bend pieces can be joined with multiple curve pieces for larger curves (4 sections are required to make a 90° turn), or used alone to create a 22.5° bend. As with the rubber cable protector, these left turn sections have (4) 38 mm x 38mm (1 1/2" x 1 1/2") channels and a larger center 41mm x 41mm (1 5/8") channel, allowing them to protect various size hoses and cables. With a heavy duty commercial grade rubber base and a yellow PVC lid, the rubber cable protector left turn sections can hold up to 9,000 lbs. per wheel. A raised tread surface on both the base and the lid of the rubber cable protector turn section aids traction. The 5-channel rubber cable protector left curve sections are backed by a one year warranty.