Rubber 5 Channel Cable Protector - Right Turn

With our 22.5 degree right turn cable protector you can easily customize the design of your cable protector system to match the traffic flow of your workplace. Interchangeable straight, left and right-hand curves snap together easily using an interlocking tab system.

  • Protects up to 5 cables or wires from any type of traffic
  • Made from heavy duty rubber
  • 22.5 degree turn
  • 18,000 lb capacity per axle
  • Pair with straight (DH-CP-2) or left turn (DH-CP-2R) pieces
  • Yellow and black for maximum visibility
  • Diamond tread pattern to prevent slips
  • Hinged lid for easy placing and removing of cables
$29.99
DH-CP-2R
$5.00
Back ordered Estimated Date 02/15/2015
Call for Shipping Discounts on Large Quantities
1 Year Warranty

Summary

Connects to the Rubber cable protector to protect cables around a 22.5° bend. Can be attached to multiple curve sections for a greater turn radius. Protects up to 5 cables or hoses.

Detail

Protect up to 5 cables, hoses, or wires around a right curve with these add on sections for the 5-channel rubber cable protector. Each right bend section locks to the rubber cable protector with a male and female tab connection system. The right turn piece creates a 22.5 degree bend, and can be joined with multiple curve pieces for larger curves (4 sections are required to make a 90° turn). Like the rubber cable protector, these right turn pieces have (4) 38 mm x 38mm (1 1/2" x 1 1/2") channels and a larger center 41mm x 41mm (1 5/8") channel to house various size hoses and cables. Constructed with a commercial grade rubber base and a yellow PVC lid, the right turn sections can support up to 18,000 lbs. per axle. Both the base and the lid of the rubber cable protector turn section have raised tread for additional traction. The 5-channel cable protector right hand turn sections are backed by a one year warranty.

5-Channel Rubber Cable Ramp 22.5° Turn - Right
4-5/8" short side
12" long side
19-3/4"
2"
9 lbs
Yellow Lid
Black Ramp
(4) 38mm (1-1/2")
(4) 38mm (1-1/2")
(1 center) 41mm (1-5/8")
(1 center) 41mm (1-5/8")
9,000 lbs
18,000 lbs
-40°F to 131°F

Product Features

  • Connects with the 5-Channel Rubber Cable Protector to curve cables around warehouse racking, poles, and other objects
  • Male/Female interlocking tabs connect the curve sections to the rubber cable protector and other curve pieces
  • Can be used with multiple turn sections for larger turns (4 corner sections needed to make a 90° curve)
  • (4) 38mm x 38mm cable channels and a (1) 41mm x 41 mm center channel
  • Heavy duty commercial grade rubber base and yellow PVC lid
  • 18,000 lbs. per axle capacity
  • Raised tread aids in traction
  • Includes a 1 year warranty

Warning and Usage Guidelines

4 Pieces needed to create a 90° turn

Review Summary