Power Wheelchair & Scooter Carrier

The SC500-ALUM scooter carrier is an affordable way to transport a power chair, wheelchair, or scooter by using a vehicle hitch receiver! An integrated 59-1/4" long loading ramp guides a powerchair or scooter up to 29-1/2" wide into the carrier and then folds up vertically for transport. When the carrier is not loaded, the loading ramp can be folded flat for rear hatch or tailgate access. The loading ramp is locked vertically by two spring pull pins and features two anti-rattle springs to reduce ramp vibrations during travel. The SC500-ALUM scooter transport carrier also includes an Anti-Tilt bracket to reduce carrier wobble and a 5/8" hitch pin.

Scooters or power wheelchairs weighing up to 500 lbs are secured to (4) 1"D eyelet tie-down points located near each corner of the 46-1/2" x 30-1/4" (usable size) platform. These eyelets are designed for use hook-end tie-down straps and use with the strongest part of the carrier frame for support. It's recommended to use these tie-down points instead of securing straps to the platform rails which may cause the straps to slide or become loose during transport. Be sure to properly secure a power scooter using hook-end tie-downs with the transport carrier eyelets.

Raised-edge 4" wide rungs are spaced 1" apart along the loading ramp and scooter carrier platform. Ramp rungs are designed for high traction with power scooter or wheelchair tires during loading while the platform rungs help eliminate scooter or powerchair shifting from side to side while hauling behind a vehicle. Spaces between the rungs allow water and debris to pass through, reducing build-up on the scooter transport carrier surface.

The power wheelchair and scooter transport carrier, SC500-ALUM, will not rust and weighs only 81 lbs! The carrier platform, frame, rungs, and ramp are constructed from heavy duty aluminum while the underside support tube and brackets are made from heavy duty reinforced steel with a gray powder-coat finish. Some assembly is required and easy to follow instructions are included. Comes with a 1 year warranty!

NOT recommended for any tow-behind trailers including 5th wheel trailers & camping trailers due to excessive bouncing of the vehicle's suspension

Power Wheelchair & Scooter Carrier Image Gallery

Power Wheelchair & Scooter Carrier Product Features: Accommodates most power wheelchairs and scooters Loading ramp folds flat into the carrier for rear hatch or tailgate access Spring pull pins lock the loading ramp in a vertical position (4) 1"D Eyelet tie-down points, great for hook-end straps Anti-Rattle Ramp Springs reduce ramp vibrations during transport Raised-edge 4" wide rungs with 1" spacing Heavy duty 500 lb weight capacity Lightweight, only weighs 81 lbs Includes an anti-tilt locking device to prevent carrier wobble For use with 2" class III or IV trailer hitches Not for use with 1 1/4" hitches Includes 5/8" hitch pin 1 Year Warranty Some assembly is required Instructions

Power Wheelchair & Scooter Carrier Product Limitations: Carrying Capacity: Designed to safely hold up to 500 lbs Hitch Weight Limit: 10% GTW - Standard Class III hitches are rated for 500 lbs & Standard Class IV hitches are rated for 1,000 lbs Vehicle Hauling Capacity: Hauling weight may be limited by the vehicle's hitch load capacity Will not work with any 1-1/4" class II or smaller receivers Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging Please check with your dealer to find out if your vehicle's carrying capacity NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers NOT recommended for use with hitch adapters / extensions Maximum scooter or power wheelchair width is 28 1/4" wide Carrier does NOT fold up vertical behind vehicle

SC500-ALUM Scooter Carrier Specifications Weight Capacity 500 lbs Usable Dimensions 46 1/2" long x 30 1/4" wide (Overall 48 1/4"L x 32"W) Tray Depth 7 5/8" (5 7/8" usable) Usable Ramp Dimensions 59-1/4" long x 28 1/4" wide (Overall 59 1/4" x 29 1/2"W) Total Carrier Weight 81 lbs Ramp Weight Only 25.25 lbs Hitch Class III or IV How Can I Tell? Center of Hitch Pin Hole to Carrier (5/8") 7 1/4" Carrier Warranty 1 Year Hitch Height 11" - 18"

Easy to load your power wheelchair or scooter Find a trailer hitch for your vehicle with the Hitch Selector!

Recommended Accessories

Item #	Description	Image	Price
SHP-2030	Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock For Class III & IV hitches	Enlarge Image	+ free s&h
AL100-Cover	Heavy Duty Scooter Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover. Size of cover is 33" tall x 28" wide x 55" long. View More Information	Click to view cover	+ free s&h
AL500-Cover	Heavy Duty Power Chair Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover with four slits in each corner of the cover to accommodate the four tie down straps. Size of cover is 38" high x 23" wide x 44" long. View More Information	Click to view cover	+ free s&h
VH-MStrap-C	1 inch wide cam buckle strap tie down kit (4 cam buckle straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
VH-MStrap	1 inch wide straps. Kit includes:(2 cam buckle straps + 2 ratchet straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
VH-MStrap-R	1 inch wide ratchet strap tie down kit (4 ratchet straps) 1200 lb capacity in black.	Enlarge Image	+ free s&h
HP31	Locking Hitch Pin for 2" Class III and IV receivers - 5/8" x 2-3/4"	Enlarge Image	+ free s&h