Charge while you drive! MobileCharge 24E from Mobility Electronics is a compact and lightweight In-Car Scooter Charger that also works with most powerchairs. It extends the powerchair or scooter battery life by reducing depth of discharge and uses a 4-stage smart charge for fast charging and longer battery life. The MobileCharge 24E In-Car Scooter Charger protects you car battery from over-discharge. It automatically begins charging when the vehicle engine is started and shuts off if the vehicle battery is low, or 2.5 hours after the engine is turned off. The scooter charger uses a standard 3-pin XLR connector compliant with most scooter & power chairs.
The In-Car scooter charger MobileCharge 24E provides two indicator lights for full notification of each operating mode, an advanced microprocessor & software design, and a pre-charge battery test helps detect bad or non-24V batteries. MobileCharge 24E scooter charger prevents output short circuit and reverse polarity and features a 2-stage protection against over-heating using a modern switchmode electronic design with a unique voltage-boosting circuit. All powered from a vehicle's 12V cigarette lighter, even while driving!
Scooter Charger Image Gallery

- Charges while driving, from a 12V vehicle cigarette lighter
- Automatic charging when vehicle engine is started
- Automatic shut-off before car battery is too low for starting
- Fast 2.5A output 4-stage smart charging
- Lightweight and compact
- Indicator charging notification lights
- Uses very little battery life when not charging
- Runs cool and conserves energy with high efficiency
- 2-Stage protection against over-heating
- Advanced microprocessor and software
- Pre-charge test detects bad/non-24V batteries
- Safely continues charge up to 2½ hours after vehicle shut-off
|
- Operating vehicle voltage: 12.2V 15.5V (DC)
- Constant current output: 2.5 Amps (Imax)
- Constant voltage output: 28.8V (Vmax)
- Charge maintenance voltage: 27.3V (Vfloat)
- Dimensions: 2.4" x 3.75" x 1.0"
- 96% maximum efficiency rating
- Rated Operating temperature: -25°C (-15°F) to +70°C (160°F)
- Standard 3-pin XLR connection (95% of scooters & powerchairs)
- 12 foot input/output cable (6' per cable)
- Compatible with 24 Volt sealed lead-acid batteries only (Gel or AGM)
- Instructions

|
In-Car MobileCharge 24E Scooter Charger Product Specifications & Price
| Item # |
Dimensions |
Cable Length |
Connector |
Charge Input |
Charge Output |
Price |
13042-24EX MobileCharge 24E In-Car Charger |
2.4" x 3.75" x 1.0" |
12' (2 x 6') |
3-pin XLR |
12V |
24V DC 2.5 Amps |
+ FREE Shipping!
|

|