Get advanced all-weather protection for your shotgun with one of these shotgun cases. Made with 600-denier polyester blend outer shell, these shotgun cases sport an innovative one-way laminate that lets moisture escape, yet blocks it from entering. Available in hunter green or jungle wood camo, the shotgun cases will look great and perform even better. The gun cases boast a two-layer padding system with a moisture-wicking inner layer and shock-absorbing, moisture-releasing outer layer. The interior lining of the shotgun case is crafted of heat-pressed absorbent fibers. A zippered pocket on the outside of the case holds your shooting accessories. Each shotgun case is made with rust-resistant cast hardware.
Click the picture below to enlarge

- 600-denier polyester blend outer shell & polyester inner fabric
- Inner layer is shock-absorbing with foam padding
- Green or Jungle Wood Camo colors available
- Storage pocket on side holds 6 shotgun shells or chokes
- Adjustable sling and carrying handles for transport
Shotgun Case Specs & Pricing
| Model # |
Description |
Gun Length |
Price |
| 62735 |
Shotgun Case with Pocket in Green |
46 inches |
+9 s&h
|
| 62736 |
Shotgun Case with Pocket in Green |
48 inches |
+9 s&h
|
| 62737 |
Shotgun Case with Pocket in Green |
50 inches |
+9 s&h
|
| 62738 |
Shotgun Case with Pocket in Green |
52 inches |
+9 s&h
|
| 62745 |
Shotgun Case with Pocket in Jungle Wood Camo |
46 inches |
+9 s&h
|
| 62746 |
Shotgun Case with Pocket in Jungle Wood Camo |
48 inches |
+9 s&h
|
| 62747 |
Shotgun Case with Pocket in Jungle Wood Camo |
50 inches |
+9 s&h
|
| 62748 |
Shotgun Case with Pocket in Jungle Wood Camo |
52 inches |
+9 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|