
The Sport Ramps are designed to accommodate smaller sports cars. These car ramps work for vehicles with tires up to 8" wide to raise the car 7". The sports car ramp is constructed of a lightweight and durable material that won't slide or scratch your cement, painted floor or other work surface. Sport Ramps have a weight capacity of 3,000 lbs per set. These ramps are manufactured from polystyrene and encapsulated with a high performance polyurethane which means they are super lightweight, only 8.5 lbs each. Each sport ramp has an attached strap to make carrying and setup fast and simple. Sport Ramps are made in the USA and come with a one year warranty. This ramp is designed to work with BMWs, C1-C3 Corvettes, Jaguars, and many more. Not recommended for low clearance vehicles such as C6 or Vipers.
If this is not the vehicle ramp you are looking for, then check out our complete line of car ramps.
Car Ramps Image Gallery

- Lightweight and durable material
- Won't scratch your work surface
- Raises vehicle 7" in the air
- Works with most small sport cars
- Attached carry handle
- 1 year warranty
- Made in USA

|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Sport Ramps Product Specifications & Price
| Item # |
Manufacturer |
Description |
Dimensions |
Incline Degree |
Weight Capacity |
Images |
Price |
| RR-40 |
Brute Industries |
Sport Ramps - Designed for smaller sports cars (set of 2) |
40" long x 10" wide x 7" tall - 17 lbs combined |
16° |
3,000 lbs/pair |
 Enlarge Image |
+ free s&h
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| 4in-Rat-Flat-Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs |
 Enlarge Image |
+ 10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
 Enlarge Image |
+ 6 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
 Enlarge Image |
+ 6 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" |
 Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
2" x8' Ratchet Combination Tie Down with Built in Axle Strap - 11,000lb Break Strength - 4000lb Working Load |
 Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
4" Combo Auto Tie Down Hook - 16,200 lb Rating |
 Enlarge Image |
+ 5 s&h
|

|