Change your motorcycle's rear tire, service brakes or eliminate flat spots during storage, all with the Black Widow swing arm stand. Specifically designed for motorcycles with single sided swing arms, this stand makes lifting the rear tire off the ground a one-person job that's almost effortless. Requires one of our interchangeable side pins (sold separately) to fit your Ducati, BMW, Honda, MV Augusta or Triumph motorcycle.
Sturdy, lightweight steel construction
Interchangeable side pin system accommodates wide variety of sport bikes
Easily lifts rear motorcycle tire
Single person operation
The professional quality Black Widow Single Sided Swing Arm Motorcycle Stand is designed specifically for lifting you rear tire off the ground for motorcycles equipped with a single sided swing arm. Perfect for changing the rear tire, servicing brakes, or keeping the wheel off the ground during storage to eliminate flat spots. The swing arm stand is made from 1-1/4" heavy duty tube and features a durable black powder coated finish for years of use in the garage, track, or shop. The universal, extra sturdy design allows the stand to deal with the cantilevered forces created by supporting the bike's weight from one side. The long 26" handle makes lifting the bike quick and easy and a one man job. Four 3" rubber coated caster wheels provide additional support when lifting the motorcycle.
The Black Widow Single Side Swing Arm Stand features interchangeable Side Pins to accommodate a variety of motorcycles with single side swing arms, like Ducati, BMW, MV Agusta, Honda, and Triumph. Each Side pin is made from high quality billet aluminum and has two bearings allowing the wheel to spin when the bike is off the ground. The stand comes in a stealthy, durable black powder coated finish and includes a 1 year warranty.
Black Widow Single Sided Swing Arm Stand
Extra sturdy, universal design
Interchangeable motorcycle Side Pin System to accommodate a variety of sport bikes
26 inch long lifting handle
Completely lift the rear of you bike for service
Perfect for off season storage to prevent tire contact with damp concrete and prevent flat spots in tires
Includes (4) three inch wheels for smooth operation when lifting
1-1/4 inch heavy duty tube design
Operates quickly and easily to lift the bike with one person
Lightweight and easy to transport
Black powder coat finish
Perfect for the garage, shop, race track, or paddock
Side pins mounted on bearings to allow wheel to spin when lifted
1 year warranty
Warning and Usage Guidelines
*Note: stand may only be used on the left side of the bike* *Note: Side Pins are sold separately*
I bought and received my stand in a couple days, shipping was super fast. I opened up the box and put the stand together. It went together super easy and ready to use.
I figured out I was shipped the wrong pin and while inspecting found the tube where the bearings insert at was angled the wrong way.
I was pretty bummed.
Called and left message for customer service, they emailed me the next day with an apology and had already shipped out the correct pin that I ordered. I discussed and showed pictures of the tube that was angled wrong and of course, next email was a shipping confirmation of a new stand being sent out as well.
I was more than happy to deal with customer service at discount ramps. They corrected the problem right away and we're friendly and easy to deal with. I will deff order from them again and recommend to others, not only about the great customer service but also about the quality of Thier products.
Deffeniatly recommend buying from discount ramps, you won't be disappointed!
5 StarsBlack Widow Rear Single Sided Swingarm for a 2014 Honda VFR800.
Anthony Rivera from NM wrote (November 27, 2015):
Very good quality stand and fast shipping. I also ordered the 46mm pin that includes two sealed bearings, so you can spin the rear wheel for lubing the chain. I highly recommend this Rear Single Sided Swing arm stand!
5 StarsAmazing Deal and Quality
Mario from OR wrote (September 29, 2015):
I own a 2006 Ducati S2R 800 Monster, and I am certainly not cheap about upgrades and maintenance, but I do set budgets and know where a deal is. A bike stand is something every do it yourself motorcycle owner has to have, and the Black Widow is an amazing piece of kit. I recently purchased the stand with pin, the item arrived in less than 3 business days from the date of shipping. While the packing itself could have had a bit more care (the shaft where the pin inserts into was sticking out of the box enough to where the UPS delivery person asked if I wanted to decline acceptance), upon opening the box, and seeing the care of how the stand was bubble wrapped and taped, all was well.
It took only a few minutes to put together, my stand came with an extra set of screws, likely a factory mistake, but appreciated all the same if I happened to lose one some how.
The wheels are smooth, and the action of lifting my bike is no worse than stands that cost double or triple the cost.
I would buy this again in a heart beat, and will be looking into a front lift for the old Duc here soon.
5 StarsBlack Widow Single Left Side Swing Arm Stand
Sharon from MD wrote (August 19, 2015):
This product met my expectations, smooth operation, held the motorcycle steady after installation. Very pleased with the look and operation of the stand.
4 StarsBlack widow single sided swingarm
Peter from FL wrote (July 12, 2015):
I received the product this past Friday and it went together well and seems to be of a very good build quality. The accessory pin fit my Ducatis single sided swingarm perfectly. I m very pleased so far!
5 StarsGood stand for a good price
Chris from CA wrote (May 02, 2015):
The stand is solid. Excellent product, which works as well as stands costing twice as much. I purchased the 40 mm pin for use on my Ducati Panigale 1199 and it fits perfectly.
5 StarsSpeed triple stand
Aaron from CA wrote (March 06, 2015):
After 2 years of ghetto rigging a stand for my speed triple, i finally decided to buy a proper stand. I looked around online for a few weeks and finally came across this stand. Since the price was about 1/2 of everything else on the market, i was originally skeptical but after i got it in the mail, everything changed. the stand was properly packaged in the box, nice and padded. It came with all the required hardware for assembly, assembly is quick and easy, i didn't even look at the instructions. The stand works like a charm. The pin is exactly the right size, The bike feels secure and doesn't move much if bumped. This is definitely going to make tire changes and chain cleaning easier. I would buy again, no questions asked.
Gary McDermott from WI wrote (January 26, 2015):
This stand fits my Honda CB1000R perfect, the paint is smooth and thick, the handle fits so tight that it really does not need the bolts to hold it on,and the pin actually runs on two sealed bearing, talk about over engineering. This is the most valued stand I could fine after looking online for a week or so.
5 StarsGreat Stand!
David from WI wrote (June 24, 2014):
Bought this for my Ducati for maintenance & to store during the winter. Works great & quality is top notch. The flexiblity of different pins for other bikes is a nice feature also.