 
Load your low profile car onto your toy hauler or car trailer with the specially designed trailer ramps. Made by Race Ramps, these trailer ramps feature the same polystyrene material and a protected polyurethane case to ensure durability and yet weigh only 30 lbs combined. The dimensions of the car trailer ramps vary depending on application (see table below). What makes these trailer ramps significant is the built in notched edge that allows the trailer door to rest on the ramp and also varies depending on your certain application. This allows the door to suspend 5", 4", or 3" off the ground to gain that extra ground clearance for your low profile car. Hang your trailer ramps on a wall with the attached handles located at the end of each ramp. The degree of incline these trailer ramps give you is 8.4° depending on length and height of door. If this is not the car ramp you are looking for, then check out our complete line of car ramps
Trailer Ramps Image Gallery

- For storage or extra clearance with a lift jack
- 5 different sizes to choose from!
- Built with a solid core making these ramps durable and sturdy
- Lightweight ramps weigh only 30 lbs combined or less
- Slotted at end to rest trailer gate on for smooth approach
- 1 year manufacturer's warranty against defective materials
- Widths vary from 14" to 16" to accommodate cars with wide tires
- Made in USA

|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Trailer Ramps Product Specifications
| Item # |
Manufacturer |
Description |
Dimensions |
Incline Degree |
Weight Capacity |
Images |
| RR-TR-4 |
Brute Industries |
4 Inch Trailer Ramps by Race Ramps for loading vehicles into toy haulers & trailers |
46" long x 14" wide x 4" tall - 18 lbs combined |
5.5° |
3,000 lbs per pair |
 Enlarge Image |
| RR-TR-5 |
Brute Industries |
5 Inch Trailer Ramps by Race Ramps for loading vehicles into toy haulers & trailers |
67" long x 14" wide x 5" tall - 28 lbs combined |
4° |
3,000 lbs per pair |
 Enlarge Image |
| RR-TR-6 |
Brute Industries |
6 Inch Trailer Ramps by Race Ramps for loading vehicles into toy haulers & trailers |
45" long x 14" wide x 6" tall - 20 lbs combined |
7.8° |
3,000 lbs per pair |
 Enlarge Image |
| RR-TR-7 |
Brute Industries |
7 Inch Trailer Ramps by Race Ramps for loading vehicles into toy haulers & trailers |
74" long x 14" wide x 7" tall - 30 lbs combined |
7.2° |
3,000 lbs per pair |
 Enlarge Image |
| RR-TR-8 |
Brute Industries |
8 Inch Trailer Ramps by Race Ramps for loading vehicles into toy haulers & trailers |
54.75" long x 16" wide x 8" tall - 30 lbs combined |
8.4° |
3,000 lbs per pair |
 Enlarge Image |
Order Here
|
Price |
|
$253.99 - $354.99 + FREE Shipping!
$253.99 + FREE Shipping!
$292.99 + FREE Shipping!
$263.99 + FREE Shipping!
$354.99 + FREE Shipping!
$292.99 + FREE Shipping!
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs 4" Flat Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs 4" J-Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Winch Strap with Chain Anchor Product Details |
 Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Flat Hook Tie-Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 3" Trailer Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 5lbs 3" Flat Hook Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 18lbs 3" Ratcheting Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load) 20" Long Soft Loop Product Details |
 Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" Heavy Duty Load Binder Product Details |
 Enlarge Image |
+ 12 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook 2" Swivel Combination T-J Hook - 11,700 lb Rating Auto Combo Hook Product Details |
 Enlarge Image |
+ 5 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap 2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load Axle Tie Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| WTD-RAT-SWIVEL |
Car Tie-Down Strap 1-1/4"W x 11'-1"L strap (11'9"L Hook to Ratchet) - Fits all auto and light truck wheels Car Tie-Down Strap Product Details |
 Enlarge Image |
Order Here |
| CTS-RAT-SNAP |
Wheel Tie-Down Net 2" W x 5-1/2' L wheel strap (Fits 13" - 16" wheels) Wheel Tie-Down Net Product Details |
 Enlarge Image |
Order Here |
| CTS-RAT-CAM |
Wheel Net 2" W x 5-1/2' L wheel net (Fits 16" D or larger wheels) Wheel Net Product Details |
 Enlarge Image |
Order Here |

|
|