Race Ramps™ Trak-Jax™ Solid Low Profile Car Service Ramps
Trak Jax Lift Your Vehicle Up To Jack Up Your Car

Gain extra clearance for inserting a jack under your vehicle. These Race Ramps lift your car up to 3" to easily service your low profile car.

Race Ramp $20 Mail in Rebate Offer on any purchase of Race Ramp products over $200

1 Year Warranty USA


Jack up your low profile car in seconds using Trak Jax by Brute Industries. These small ramps give you 3" of extra clearance to slide your jack under for servicing. Made of polystyrene and encapsulated with a high performance polyurethane, these short ramps will last long and are lightweight. The dimensions of the Trak Jax race ramps is 3" high x 30" long x 12" wide or 3" high on the RR-TJ-S. The Trak Jax - RR-TJ-S features a small 1" wheel stop to prevent your car from drive off the short ramp. Get that extra little clearance you need with the Trak Jax - Race Ramps by Brute. If this is not the car ramp you are looking for, then check out our complete line of car ramps

Race Ramps - (2) Trak Jax for Jacking up Your Vehicle
3" (1" high wheel stop)

Product Features

  • Easily slide a jack under your car with these Race Ramps
  • Built with a solid core making these ramps durable and sturdy
  • Lightweight ramps weigh only 5 lbs each
  • Sold in pairs
  • 3000 lb capacity - the two ramps combined
  • Come with wheel stops or without
  • Lifts your car up to 3"
  • 1 year manufacturer's warranty against defective materials
  • Dimensions are 3" high x 30" long x 12" wide to accommodate cars with wide tires
  • Made in USA

Warning and Usage Guidelines

  • Before using the ramps ensure other persons are clear of the vehicle and the ramps
  • Ensure that the ramps are free from damage or corrosion before use.
  • Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
  • Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
  • Carefully drive the vehicle onto the automotive ramps until it is in the correct position
  • Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
  • Before starting work, walk around the vehicle ensuring it is securely positioned
  • Always use jack stand if a person will be going under the vehicle
  • On completion of the work, check the parking brake is still firmly on and remove the chocks
  • It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
  • Exercise caution when using these car ramps with a trailer or three wheeled vehicle


Ramps vs. Jack Stands: Which are Best for Auto Service?

Review Summary