This carrier is designed for those who wish to take their mobility scooter or power wheelchair with them on trips but do not have the room to put the scooter in their car, van, or SUV. This wheelchair carrier's long ramp allows an able companion to roll the scooter or wheelchair up the ramp and onto the rack section of the carrier. The carrier can be stored in the upright position when not in use. Need a hitch for a mobility carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!
VH-MS Wheelchair Carrier Image Gallery
Easy to Open, Load and Close!

- 60 inch center folding ramp
- Ramp easily locks into a folded upright position with spring pull locks
- 7" from center of pin hole to carrier when folded up
- Ramp folds into a flat position when not in use
- Ramp can be removed
- Carrier tilts up when not in use (multiple tilted positions)
- 14 slots for tie down hooks
- Tough powder coat finish
- 500 lb weight capacity
- Weighs 90 lbs
- VH-MS Instructions

- Lanyard Instructions

- Carrier Carrying Capacity: The VH-MS carrier is designed to safely carry 500 lbs
- Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs - Most Class IV hitches are rated for 1000 lbs
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
- Will not work with Class I receivers
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
- Please check with your dealer to find out your vehicle's carrying capacity
- NOT recommended for tow-behind trailers including 5th wheel trailers and camping trailers
Find a trailer hitch for your vehicle with the Hitch Selector!

Versa-Haul Medical Rack Product Specifications & Price
| Item # |
Manufacturer |
Description |
Capacity |
Weight |
Tray Length |
Tray Width |
Tray Height |
Ramp Dimensions |
Hitch Size |
Price |
| VH-MS |
VersaHaul |
Hitch mounted mobility carrier with built in loading ramp Each rack comes standard with BOTH 1-1/4" hitch insert and a 2" insert and both flip up for transport |
500 lbs |
Carrier: 60 lbs Ramp: 30 lbs |
46.5" (inner) 48.5" (outer) |
27.75" (inner) 28.25" (outer) |
4" |
61" L x 27.5" W x 1" H |
Class II, III or IV (how can I tell?) |
+ free s&h
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| AL100-Cover |
Heavy Duty Scooter Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover. Size of cover is 33" tall x 28" wide x 55" long. View More Information |
 Click to view cover |
+ free s&h
|
| AL500-Cover |
Heavy Duty Power Chair Transport Cover - Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover with four slits in each corner of the cover to accommodate the four tie down straps. Size of cover is 38" high x 23" wide x 44" long. View More Information |
 Click to view cover |
+ free s&h
|
| VH-MStrap-C |
1 inch wide cam buckle strap tie down kit (4 cam buckle straps) 1200 lb capacity in black. |
 Enlarge Image |
+ free s&h
|
| VH-MStrap |
1 inch wide straps. Kit includes:(2 cam buckle straps + 2 ratchet straps) 1200 lb capacity in black. |
 Enlarge Image |
+ free s&h
|
| VH-MStrap-R |
1 inch wide ratchet strap tie down kit (4 ratchet straps) 1200 lb capacity in black. |
 Enlarge Image |
+ free s&h
|
| HP31 |
Locking Hitch Pin for 2" Class III and IV receivers - 5/8" x 2-3/4" |
 Enlarge Image |
+ free s&h
|
| A20402 |
Standard Hitch Pin for 2" Class III and IV receivers - 5/8" x 4-3/4" |
 Enlarge Image |
+ free s&h
|


|