*NOTE* The ramp securing lock has been redesigned. You can see the new design above & here.
The SC500 deluxe wheelchair and scooter carrier has all the premium features offered at a super low introductory affordable price! The main features of this mobility carrier are the folding design and extra long 60" (5 foot) loading ramp allowing for this carrier to be used on just about any vehicle with a 2" trailer hitch. With the pull of a hitch pin your carrier can be folded up vertical to the back of your vehicle to save space when parking in car ports, garages, or parking lots! The wheelchair and scooter carrier is constructed of steel, has a thick black powder coat to protect from the elements, and has a massive 500lb. weight capacity! The surface of the carrier is a heavy duty steel mesh with 1" square support tubes underneath which won't bend or flex from the weight of your scooter or wheelchair. The mobility carrier has everything you need for loading and hauling your expensive mobility device.
The wheelchair and scooter carrier features an integrated 2 section ramp which folds up and out into 3 different positions. The first position keeps the ramp folded flat to the carrier surface and held down with a spring pull pin. The folded flat position is to keep the ramp self stored and secured when the carrier is folded up. The second ramp position allows the ramp to stand up straight when a mobility device is on the carrier. The ramp is held vertically in place with a spring pull pin and another pin keeps the ramp incase the first one malfunctions as a safety feature. The last position is the ramp unfolded. This position allows for scooters or power wheelchairs to be pushed or driven up the ramp. Please Note: Mobility devices are not to be occupied when loading, unloading, or on the carrier! The ramp is 27 1/2" wide by 60" long providing a gradual slope for easy loading of your mobility device. A welded handle featured on the ramp allows for easy folding and unfolding. Tie down straps are available in cam or ratchet styles with rubber coated hooks which can be hooked onto any of the 10 tie down holes featured on the 4 1/4" tall ramp sides. The ramp sides feature 5 carrying handles for easy handling when installing the device. The rear of the carrier has 2 reflectors for greater visibility at night. The carriers usable dimensions are 48 1/4" long by 28" wide accommodating almost all of today's mobility devices.
Supporting the carrier is the heavy duty 2" hitch tube which features 4 bolts and a safety pin underneath to allow the hitch tube to be removed from the carrier. The hitch tube has a 5/8" hitch pin hole for securing the carrier to your vehicle and will work on class III or IV hitches.(hitch pin not included) A bolt fitted underneath the folding hitch tube allows you to level the carrier so that the pin holes line up to secure the carrier in the unfolded position. The distance between the hitch pin hole and the carrier is 13 7/8" unfolded and when the carrier is folded the distance is 4 3/4". This carrier is not recommended for 1 1/4" hitches. Also available is a heavy duty anti-tilt locking device which will prevent carrier wobble during transportation. (Anti-tilt locking device cannot be used on hitches with long chain loops that extend to the back of the hitch!) A 10 minute assembly and a simple 5 bolt installation allows you to use your carrier right when you get it! Includes a 1 year warranty!
Instruction Manual Assembly Instructions
- Accommodates most power wheelchairs and scooters
- Self storing loading ramp saves time when loading and unloading
- Spring pull pins keep the ramp secure when in the folded and vertical position
- Carrier folding design saves space
- Thick black powder coat protects from the elements
- Heavy duty 500 lb weight capacity
- Only weighs 84 lbs
- Steel expanded mesh surface with raised 4 1/4" side rails
- 10 tie down points (tie-down straps not included)
- 5 carrying handles
- Easy 5 bolt assembly
- Includes a anti-tilt locking device to prevent carrier wobble
- Trailer hitch pin sold separately
- For use with 2" class III or IV trailer hitches
- Not for use with 1 1/4" hitches
- "Swing Away" option available for increased access to the rear of your vehicle
- 1 Year Warranty
|
 |
- Carrier Carrying Capacity: The SC50000 carrier is designed to safely carry 500 lbs.
- Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs. Most Class IV hitches are rated for 1000 lbs
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
- Will not work with class II or smaller receivers
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
- Please check with your dealer to find out if your vehicle's carrying capacity
- NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers
Click the mobility carrier pictures below to enlarge

4 Easy Steps to load your Scooter or Wheelchair
Click the pictures below to enlarge

Find a trailer hitch for your vehicle with the Hitch Selector!

Wheelchair & Scooter Carrier Specifications
| Weight Capacity |
500 lbs. |
| Usable Dimensions |
48 1/4" long X 28" wide |
| Ramp Dimensions |
60" long X 27 1/2" wide |
| Wheelchair/Scooter Carrier Weight |
84 lbs. |
| Maximum Wheelchair/Scooter Width |
27" |
| Hitch Class |
III or IV How Can I Tell? |
Center of Pin Hole to Carrier Length (unfolded) |
13 7/8" |
Center of Pin Hole to Carrier Length (folded) |
4 3/4" |
| Carrier Warranty |
1 Year |
| SPECIAL INTRODUCTORY PRICE ON THE NEW SC500 MOBILITY CARRIER FOR LESS!! |
Model# SC500 (Scooter/Wheelchair Carrier w/ ramp) |
+ Free Shipping!
|
SC500-SWING ("Swing Away" Option) |
+ Free Shipping!
Swing Away Kit for increased access for the rear hatch or tailgate of your vehicle. Includes (1) Hitch Height Adaptor & (1) Swing Away Arm. View Installation Instructions KIT DOES NOT INCLUDE SC500 CARRIER
|
 Click to enlarge |
Silent Hitch Pin For Class III & IV hitches |
+ Free shipping
Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock |
 Click to enlarge |
Scooter Cover (Heavy Duty Scooter Transport Cover) |
+ Free Shipping!
Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover. Size of cover is 33"tall x 28" wide x 55" Long. |
 Click to view cover |
Power Wheelchair Cover
(Heavy Duty Wheelchair Transport Cover) |
+ Free Shipping!
Our high quality covers are made from an extremely durable but lightweight weather resistant material that will continue to provide years of protection for your scooter. Water resistant cover with 4 slits in each corner of the cover to accommodate the 4 tie down straps. Size of cover is 38"tall x 23" wide x 44" Long. |
 Click to view cover |
VH-MStrap-C
(Strap securing package) |
+ Free Shipping!
1 inch wide cam buckle strap tie down kit (4 cam buckle straps) 1200 lb. capacity in black. |
 click to enlarge |
VH-MStrap
(Strap securing package) |
+ Free Shipping!
1 inch wide straps. Kit includes:(2 cam buckle straps + 2 ratchet straps) 1200 lb. capacity in black. |
 click to enlarge |
VH-MStrap-R
(Strap securing package) |
+ Free Shipping!
1 inch wide ratchet strap tie down kit (4 ratchet straps) 1200 lb. capacity in black. |
 click to enlarge |
HP31 (Locking Hitch Pin) |
+Free Shipping!
for 2" class III and IV receivers - 5/8" x 2-3/4" |
 Click to enlarge |
A20402 (Standard Hitch Pin) |
+ Free Shipping!
for 2" class III and IV receivers - 5/8" x 4-3/4" |
 Click to enlarge |

|