Vantech H1 Side-Mount Aluminum Roof Rack H2229W
The Vantech H1 Sidemount aluminum system can hold up 250 lbs per bars. The Cross bars is 2in x 1in reinforced extruded aluminum with built-in channels. The Cross bar is protected by a non-slip rubber bar guard on top that is easily pressed into the channels. The aluminum mounting upright is approx. 1/8in thick at the base. The mounting uprights are 8in wide at the base and 16.5in total height. The Base is welded complete onto the upright post for complete seal. There are 4x 1in eyehook per mounting upright. Drilling is required to install this system. 11 gauge steel 2in x 8in Heavy-duty interior plate with bolts create a strong bond between the interior and exterior steel. Rubber cap on the upright post prevents wind noise and water leakage.
The Vantech H1 Sidemount aluminum system can hold up 250 lbs per bars. The Cross bars is 2in x 1in reinforced extruded aluminum with built-in channels. The Cross bar is protected by a non-slip rubber bar guard on top that is easily pressed into the channels. The aluminum mounting upright is approx. 1/8in thick at the base. The mounting uprights are 8in wide at the base and 16.5in total height. The Base is welded complete onto the upright post for complete seal. There are 4x 1in eyehook per mounting upright. Drilling is required to install this system. 11 gauge steel 2in x 8in Heavy-duty interior plate with bolts create a strong bond between the interior and exterior steel. Rubber cap on the upright post prevents wind noise and water leakage.
