Skip to Main Content Skip to Footer Content
Call Us Today! Experts now available 24/7.

Elevate Outdoor RV Stabilizer Jacks with Hand Crank - Set of Two

Ships today!
Add an extended warranty from Extend protection plansLearn more
  • Stabilize RVs or trailers once they are leveled with chocks in place
  • Heavy-duty steel construction
  • Each jack supports up to 5,000 lbs.
  • Two installation methods; bolt or weld to frame (bolts not included)
  • Measures 4.25" fully retracted; measures 24" fully extended
  • Multi-hold mounting plate included; footpads create great surface area to combat sinking or tilting
  • Includes a quarter-inch speeder handle socket wrench

Rowdy grandkids? Bad weather? Regardless of what’s going on, keep your RV stable with this pair of frame-mounted Elevate Outdoor Stabilizer Jacks. These steel stabilizer jacks are designed to keep RVs, trailers and other vehicles stable while parked and in use. Weld or bolt (bolts not included) the jacks to each side of the trailer frame and use the included quarter-inch speeder handle socket wrench to extend each stabilizer to the ground. Fully retracted, they lie 4.5" high, and they extend out 24" once fully opened up.

Each jack features a 3.5" x 7" multi-hold mounting plate, as well as a 4.5" x 9" footpad to combat sinking and tilting on softer ground or unsteady surfaces. Each jack is rated to support up to 5,000 lbs.

5,000 lbs.
15 lbs.
Extend each jack until it touches the ground. Do not overextend the jack once it’s resting on the ground as this could result in damage to the jack. Use the stabilizer jacks once the trailer or RV is parked and level with wheel chocks in place. When you’re ready to leave your site, retract your stabilizer jacks before removing your chocks and leveling blocks. Never drive with the stabilizer jacks extended.
WARNING: This product can expose you to chemicals, including Lead and Cadmium, known to the state of California to cause cancer, birth defects or other reproductive harm. For more information, go to For more information, go to
Product Q&A
Warranty Badge
General Warranty Information
  • Discount Ramps offers a One-Year Warranty and guarantees this product to be free of defects at the time of receipt. Please note that all warranty claims must be made directly to the original place of purchase.
Warranty Service
  • If you wish to submit a warranty claim, please contact us promptly at (888) 651-3431, Mon - Fri from 8am to 5:30pm CST.
  • Please be prepared to submit photos to assist our staff with processing your claim. Any defects will be determined by Discount Ramps with relevant evidence. If a defect is confirmed, Discount Ramps will replace the defective part with the same or similar product at no charge. The purchaser is responsible for labor charges.
Warranty Limitations
  • This warranty is non-transferrable, and becomes void if the product has been misused, neglected, altered, damaged or tampered with.
  • The product manufacturer reserves the right to substitute, discontinue, alter or modify any product or part at any time without notifying the purchaser. If this product is discontinued or modified prior to the warranty claim, Discount Ramps will substitute the defective product or part.
  • Products not manufactured by Discount Ramps are covered under the warranty of their manufacturer.
Limited Liability
  • Discount Ramps shall not be held liable for any damages that arise from the use of this product, including and not limited to property damage, loss of value of the product or loss of use of the product.