Skip to Main Content Skip to Footer Content
Call Us Today! Experts now available 24/7.

SaltDogg 3/4 Cubic Yard Electric Poly Hopper Spreader

Make a Selection
Starting at
Select Description:
This item is non-returnable.
  • Manufactured with a patented double-wall poly hopper that won't rust or dent
  • Fits UTVs, half-ton and three-quarter ton trucks and utility vehicles; handles bulk salt or a 50/50 sand/salt mix
  • 12V DC-powered electric drive with vibrator control
  • In-cab controlled independent auger and spinner motors
  • 14-Inch poly spinner broadcasts material up to 30 feet; removable for cleaning or storage
  • Includes top screen, tarp, tie-downs and remote auger bearing grease kit
  • Extended length chute available so lifted trucks can broadcast at standard height
Item # Description Length Width Height Weight Maximum Capacity Availability Price Action
SHPE0750 Standard Chute 63-1/4" 48" 28" 280 lbs. 0.75 cubic yards
View Details
SHPE0750X Extended Chute 63-1/4" 48" 28" 280 lbs. 0.75 cubic yards
View Details

The SaltDogg 3/4 Cubic Yard Electric Poly Hopper Spreader is available with a standard or extended length chute, and it gives contractors and facility managers a low-volume hopper spreader ready for residential or commercial use. Electric power means quieter operation with no need for refueling or engine servicing. Manufactured from tough poly, the 53" long hopper has a patented double-wall construction that won't rust or dent. It fits in the back of a UTV, or can be used with a half-ton or three-quarter ton pickup truck. It can accommodate bulk salt, or a 50/50 salt/sand mix. Forklift slots provide easy mounting at the start of the season, and this spreader comes with a top screen, tarp, tie-downs and a remote auger bearing grease kit.

The spreader has a 2-1/2" stainless steel auger and trough with a 200-pound capacity vibrator to keep material flowing. The auger automatically reverses when it encounters a jam to clear the clog and restore flow, which is powered by an independent 1/2 HP, 12V gear motor. The 14"poly spinner can cast material in a 5 to 30-foot radius, powered by an independent 1/4 HP, 12V gear motor. The vibrator and independent auger and spinner speeds are controlled by a closed-loop in-cab controller. The extended chute is a good choice for trucks that are higher off the ground, as it allows the material to get spread closer to the road for less waste and better ground coverage.

280 lbs.
0.75 cubic yards
Do not overload your vehicle beyond the vehicle's GVWR or GAWR. Check the vehicle's load rating certification sticker for the maximum vehicle capacity. Observe all safety precautions before, during and after operating this spreader. By following these precautions and common sense, possible injury to persons and potential damage to this machine may be avoided. Please note that this product is non-returnable.
WARNING: This product can expose you to chemicals, including Chromium (hexavalent compounds), known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to
Product Q&A
Warranty Badge
  • This product is covered by the manufacturer’s 2 Year Warranty.