Race Ramps™ Solid Car Show Ramps - 1,500 lbs. Capacity (each)

Free Standard Shipping
In Stock
  • Durable polystyrene construction
  • Lighweight 5 lb. design
  • 14" wide approach
  • Supports up to 1,200 lbs.

The Race Ramps™ Solid Car Show Ramps feature a 14" wide approach. These ramps are manufactured from polystyrene and encapsulated with high-performance polyurethane, which means they are lightweight (only 5 lbs. each) and support up to 1,200 lbs. per ramp. The versatile drive-on car ramps should be used with cars that have ground clearances of 5-1/4" or more.

2,400 lbs. per axle
5 lbs.
Before using the ramps ensure other persons are clear of the vehicle and the ramps; Ensure that the ramps are free from damage or corrosion before use.; Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle; Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread; Carefully drive the vehicle onto the automotive ramps until it is in the correct position; Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground; Before starting work, walk around the vehicle ensuring it is securely positioned; Always use jack stand if a person will be going under the vehicle; On completion of the work, check the parking brake is still firmly on and remove the chocks; It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp; Exercise caution when using these car ramps with a trailer or three wheeled vehicle
All products are guaranteed to be free of defects at time of receipt. Warranties are non-transferable. If you have a question regarding the warranty on a specific item, contact our product experts at 1-888-651-3431, Monday - Friday from 8:00am to 5:30pm Central Standard Time.