Race Ramps™ Solid Car Trailer Ramps for Enclosed Trailer - 6,000 lb. Capacity

$374.30
RR-TR-7-FLP-DR
Free Standard Shipping
In Stock
  • Manufactured from lightweight polystyrene
  • Measures 6' 2" L x 14" W x 7" H
  • 6,000 lb. weight capacity per pair
  • Reduces approach angle to 5.5 degrees
  • 14" width fits wider tires
  • Designed for enclosed trailers
  • Coated surface prevents scratches and damages to flooring

Race Ramps flap cut-out trailer ramps are specially designed for enclosed trailer ramps that include an extension flap. This ramp has a built-in cut-out that provides a resting place for up to a 16" trailer flap. Trailer ramps with a flap cut-out are designed to safely get low ground clearance vehicles on and off trailers without scraping or damaging the underside of the vehicle. Made by Brute Industries, these ramps use a patented lightweight technology when constructing the ramps to ensure that they are durable and very stable. The material used for the flap cut-out trailer ramp is easy to clean and won't rust like metal trailer ramps. The unique coated surface won't scratch or scuff garage floors or asphalt and provides a no-slip surface. For storage, trailer ramps conveniently hang on a wall with the attached handles located at the end of each ramp. If this is not the trailer ramp you're looking for, then check out Race Ramps standard length trailer ramps, available in several different heights.

6' 2"
14"
7"
38 lbs. per ramp
6,000 lbs. per pair
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicle.
Warranty Badge
General Warranty Information
  • Discount Ramps offers a One-Year Warranty and guarantees this product to be free of defects at the time of receipt. Please note that all warranty claims must be made directly to the original place of purchase.
Warranty Service
  • If you wish to submit a warranty claim, please contact us promptly at (888) 651-3431, Mon - Fri from 8am to 5:30pm CST.
  • Please be prepared to submit photos to assist our staff with processing your claim. Any defects will be determined by Discount Ramps with relevant evidence. If a defect is confirmed, Discount Ramps will replace the defective part with the same or similar product at no charge. The purchaser is responsible for labor charges.
Warranty Limitations
  • This warranty is non-transferrable, and becomes void if the product has been misused, neglected, altered, damaged or tampered with.
  • The product manufacturer reserves the right to substitute, discontinue, alter or modify any product or part at any time without notifying the purchaser. If this product is discontinued or modified prior to the warranty claim, Discount Ramps will substitute the defective product or part.
  • Products not manufactured by Discount Ramps are covered under the warranty of their manufacturer.
Limited Liability
  • Discount Ramps shall not be held liable for any damages that arise from the use of this product, including and not limited to property damage, loss of value of the product or loss of use of the product.