Skip to Main Content Skip to Footer Content
Call Us Today! Experts now available 24/7.

Race Ramps™ XTenders Solid Extensions for Car Tow Ramps - 5,000 lb. Per Axle Capacity

Free Standard Shipping
Temporarily Out of Stock
6-8 Week Lead Time
  • Manufactured from lightweight polystyrene
  • Measures 2' 11" L x 10" W x 2" H
  • 5,000 lb. per axle weight capacity
  • Anti-skid texture keeps extensions from sliding, no matter what surface they are used on
  • Will not damage floors
  • Further reduces the approach angle to 3 degrees for super low profile cars such as race cars and exotics

Race cars and low sports cars sometimes need an even more gradual incline to prevent the underbody from scraping. These Race Ramps XTender ramps from Brute fit over the 7-10 tow truck ramps to lower the approach angle to just 3 deg.. Manufactured from the same solid core material as the tow ramps, these XTenders have an anti-skid texture that keeps them in place and won't damage garage or shop floors and can accommodate up to 5,000 lbs. per axle.

2' 11"
6 lbs. per ramp
5,000 lbs. per axle
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicle.
Product Q&A
Warranty Badge
General Warranty Information
  • Discount Ramps offers a One-Year Warranty and guarantees this product to be free of defects at the time of receipt. Please note that all warranty claims must be made directly to the original place of purchase.
Warranty Service
  • If you wish to submit a warranty claim, please contact us promptly at (888) 651-3431, Mon - Fri from 8am to 5:30pm CST.
  • Please be prepared to submit photos to assist our staff with processing your claim. Any defects will be determined by Discount Ramps with relevant evidence. If a defect is confirmed, Discount Ramps will replace the defective part with the same or similar product at no charge. The purchaser is responsible for labor charges.
Warranty Limitations
  • This warranty is non-transferrable, and becomes void if the product has been misused, neglected, altered, damaged or tampered with.
  • The product manufacturer reserves the right to substitute, discontinue, alter or modify any product or part at any time without notifying the purchaser. If this product is discontinued or modified prior to the warranty claim, Discount Ramps will substitute the defective product or part.
  • Products not manufactured by Discount Ramps are covered under the warranty of their manufacturer.
Limited Liability
  • Discount Ramps shall not be held liable for any damages that arise from the use of this product, including and not limited to property damage, loss of value of the product or loss of use of the product.