Bottom Void with Rubber Pad - Fire Service/All Terrain Wheel Chock - 80,000lb Capacity
- Contoured surface designed for use on fire truck tires
- Complies with NFPA 1901-1904 & SAE-J351
- Heavy duty urethane construction
- Molded carrying handle for easy handling
- Rubber pads on bottom for traction
- Measures 15.5" L x 8.5" W x 8.25" H
The Fire Engine Wheel Chocks are specifically designed for use with fire equipment and comply with NFPA 1901-1904 and meet SAE-J348 standards. Manufactured from heavy-duty urethane, the fire enginge wheel chocks resist corrosion from oils, fuels, and solvents. Each wheel chock features a carrying handle molded into the chock for easy transportation, a mounting hole for attaching ropes, chain, or brackets, and replaceable rubber pads for traction on concrete. This chock measures 15.5" L x 8.5" W x 8.25" H.
Rubber Pad, Void Bottom
15-1/2"
8-1/2"
8-1/4"
7.1 lbs.
80,000 lbs.
Improper use may result in product failure; Select wheel chock according to vehicle type and size; Always use in pairs and on firm surfaces; Chock in direction of grade; Chock both sides of wheel if direction of grade is undetermined; Use only after parking brake is applied and tested; Center chocks snugly and squarely against tread of each wheel; Always test chocks to insure they meet requirements; Do not drive over wheel chocks
WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This product is covered by the manufacturer’s Warranty.