Race Ramps™ Solid Car Wheel Stands - 3,000 lbs. Capacity

Free Standard Shipping
In Stock
  • Manufactured from durable polystryrene
  • Textured surface prevents slipping
  • Will not scratch floor surface or vehicle
  • Supports up to 1,500 lbs. per block

The Race Ramps Solid Car Wheel Stands are lightweight 16" square platforms for displaying your vehicle or use with a scale or a turntable. Its textured surface prevents slipping and will not scratch or mar floors.

3,000 lbs.
25 lbs.
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.
All products are guaranteed to be free of defects at time of receipt. Warranties are non-transferable. If you have a question regarding the warranty on a specific item, contact our product experts at 1-888-651-3431, Monday - Friday from 8:00am to 5:30pm Central Standard Time.