Skip to Main Content Skip to Footer Content
Call Us Today! Experts now available 24/7.

Black Widow Front Pin & Rear Swingarm Motorcycle Stand Kit

Ships today!
Add an extended warranty from Extend protection plansLearn more
  • Easy, one-person operation lifts motorcycle completely for service or storage
  • Front fork pins are specially-designed to increase stability; fit forks 6" to 11" wide
  • Rear rubber-coated pads lift bike without scratching; fit swingarms 6" to 15.625" wide
  • Durable 1.5" diameter steel tube construction with heavy-duty steel support gussets
  • Each stand has four 3" rubber-coated wheels

The Black Widow Front Pin & Rear Swingarm Motorcycle Stand Kit efficiently lifts both tires of your sport bike or dirt bike off the ground to make simple projects easier, or prevent flat spots in long-term storage. Designed for stability, both stands are manufactured with 1.5" diameter steel tubing with heavy-duty steel gusset supports. Each stand has two sets of two 3" rubber-coated wheels to provide smooth movement while positioning.

The specially-designed front fork pins have tapered struts that fit into the holes of the bottom end of the motorcycle's front forks to increase stability and prevent sliding while you're working on your bike. They accommodate motorcycles with fork widths from 6" to 11". The rubber-coated swingarm pad hooks under the rear swingarms of the motorcycle to lift it safely and securely without scratching paint. They accommodate motorcycles with swingarm widths from 6" to 15.625".

To operate, use the wheels to slide each stand into position with the pins below the front forks and the pads below the rear swingarms. Then, with control, lower each stand by the handle until the bike is raised and both handles are resting on the ground. The stand wheels and two contacts per stand will rest of the ground to prevent scratches to the tubing of the stands.

Please note: This is a universal stand design. Measure the width of your front forks and rear swingarms before purchasing. This kit is designed for rear dual-sided motorcycle swingarms and will NOT work for rear single-sided motorcycle swingarms. While raising or lowering, keep a firm hand on the motorcycle to prevent accidental shifting.
Product Q&A
Warranty Badge
General Warranty Information
  • Discount Ramps offers a One-Year Warranty and guarantees this product to be free of defects at the time of receipt. Please note that all warranty claims must be made directly to the original place of purchase.
Warranty Service
  • If you wish to submit a warranty claim, please contact us promptly at (888) 651-3431, Mon - Fri from 8am to 5:30pm CST.
  • Please be prepared to submit photos to assist our staff with processing your claim. Any defects will be determined by Discount Ramps with relevant evidence. If a defect is confirmed, Discount Ramps will replace the defective part with the same or similar product at no charge. The purchaser is responsible for labor charges.
Warranty Limitations
  • This warranty is non-transferrable, and becomes void if the product has been misused, neglected, altered, damaged or tampered with.
  • The product manufacturer reserves the right to substitute, discontinue, alter or modify any product or part at any time without notifying the purchaser. If this product is discontinued or modified prior to the warranty claim, Discount Ramps will substitute the defective product or part.
  • Products not manufactured by Discount Ramps are covered under the warranty of their manufacturer.
Limited Liability
  • Discount Ramps shall not be held liable for any damages that arise from the use of this product, including and not limited to property damage, loss of value of the product or loss of use of the product.