Black Widow Front Pin & Rear Spool Motorcycle Stand Kit

The Black Widow Front Pin & Rear Spool Motorcycle Stand Kit efficiently lifts both tires of your sport bike or dirt bike off the ground to make simple projects easier, or prevent flat spots in long-term storage. Designed for stability, both stands are manufactured with 1.5" diameter steel tubing with heavy-duty steel gusset supports. Each stand has two sets of two 3" rubber-coated wheels to provide smooth movement while positioning.

The specially-designed front fork pins have tapered struts that fit into the holes of the bottom end of the motorcycle's front forks to increase stability and prevent sliding while you're working on your bike. They accommodate motorcycles with fork widths from 6" to 11". The hollow notch in the spool attachments fits under the rear spools of the motorcycle to lift it safely and securely without scratching paint. They accommodate motorcycles with spool widths from 12" to 15.25".

To operate, use the wheels to slide each stand into position with the pins below the front forks and the pads below the rear spools. Then, with control, lower each stand by the handle until the bike is raised and both handles are resting on the ground. The stand wheels and two contacts per stand will rest of the ground to prevent scratches to the tubing of the stands.

Please note: This is a universal stand design. Measure the width of your front forks and rear spools before purchasing. While raising or lowering, keep a firm hand on the motorcycle to prevent accidental shifting.