Black Widow Front Prong & Rear Swingarm Motorcycle Stand Kit

The Black Widow Front Prong & Rear Swingarm Motorcycle Stand Kit efficiently lifts both tires of your sport bike or dirt bike off the ground to make simple projects easier, or prevent flat spots in long-term storage. Designed for stability, both stands are manufactured with 1.5" diameter steel tubing with heavy-duty steel gusset supports. Each stand has two sets of two 3" rubber-coated wheels to provide smooth movement while positioning.

The 2.5" long rubber-coated pivoting prong arms lift under the bottom and back side of the motorcycle's front fork tubes without scratching paint. They accommodate motorcycles with fork widths from 6" to 11.5". The rubber-coated swingarm pad hooks under the rear swingarms of the motorcycle to lift it safely and securely without scratching paint. They accommodate motorcycles with swingarm widths from 6" to 15.625".

To operate, use the wheels to slide each stand into position with the prongs below the front forks and the pads below the rear swingarms. Then, with control, lower each stand by the handle until the bike is raised and both handles are resting on the ground. The stand wheels and two contacts per stand will rest of the ground to prevent scratches to the tubing of the stands.

Please note: This is a universal stand design. Measure the width of your front forks and rear swingarms before purchasing. This kit is designed for rear dual-sided motorcycle swingarms and will NOT work for rear single-sided motorcycle swingarms. While raising or lowering, keep a firm hand on the motorcycle to prevent accidental shifting.