Load Levelers for Step Deck Trailers - 20,000 lb. Capacity

Starting at
$524.99
20-04-101
Make a Selection
Select Height:
  • Manufactured from high-strength, lightweight aluminum
  • Available in 18", 20", 22", 24" and 26" heights
  • 20,000 lb. maximum load capacity per bridge (over 48" span)
  • Each bridge weighs under 70 lbs.
  • Offset stakes pocket posts have 1/2" width adjustment by pulling pin and rotating stake
  • 4" x 4" Apitong wood, chain and load binders sold separately
Item # Maximum Capacity Length Width Height Weight Availability Price  
20-04-101-18-LL 20,000 lbs. 5" 97-1/4" 18" 55 lbs.
$524.99
View Details
20-04-101-20-LL 20,000 lbs. 5" 97-1/4" 20" 60 lbs.
$529.99
View Details
20-04-101-22-LL 20,000 lbs. 5" 97-1/4" 22" 64 lbs.
$534.99
View Details
20-04-101-24-LL 20,000 lbs. 5" 97-1/4" 24" 66 lbs.
$539.99
View Details
20-04-101-26-LL 20,000 lbs. 5" 97-1/4" 26" 69 lbs.
$544.99
View Details

Load leveler bridges are an essential tool for truckers transporting flatbed loads on a step deck trailer. Easy to install, our load levelers fit into the stake pockets of your truck and are secured with chains that run through a channel on the top of the load levelers. Load levelers have an adjustable offset stake pocket post that can be rotated to different positions. This allows a .5 inch of adjustment of overall width to accommodate most drop deck trailers by simply pulling a pin and rotating. These load levelers will fit trailers with an 18" , 20" , 22" , 24", or 26" drop including Doonan, Featherlite, and Transcraft stepdeck trailers and many others. The stake pockets adjust from 97-1/4" - 97-3/4" W (inside measurement of stake pockets across width of trailer). Load leveler bridges can be set up in minutes and are secured with chains and binders (not included). Welded brackets on bridges secure a 4x4 piece of wood (not inluded). Manufactured from lightweight aluminum, these bridges are easy to handle. We also sell Load Leveler/Ramp combo kits if a modular loading ramp is needed.

20,000 lbs. per axle
5"
Aluminum
Warranty Badge
General Warranty Information
  • Discount Ramps offers a Five-Year Warranty and guarantees this product to be free of defects at the time of receipt. Please note that all warranty claims must be made directly to the original place of purchase.
Warranty Service
  • If you wish to submit a warranty claim, please contact us promptly at (888) 651-3431, Mon - Fri from 8am to 5:30pm CST.
  • Please be prepared to submit photos to assist our staff with processing your claim. Any defects will be determined by Discount Ramps with relevant evidence. If a defect is confirmed, Discount Ramps will replace the defective part with the same or similar product at no charge. The purchaser is responsible for labor charges.
Warranty Limitations
  • This warranty is non-transferrable, and becomes void if the product has been misused, neglected, altered, damaged or tampered with.
  • The product manufacturer reserves the right to substitute, discontinue, alter or modify any product or part at any time without notifying the purchaser. If this product is discontinued or modified prior to the warranty claim, Discount Ramps will substitute the defective product or part.
  • Products not manufactured by Discount Ramps are covered under the warranty of their manufacturer.
Limited Liability
  • Discount Ramps shall not be held liable for any damages that arise from the use of this product, including and not limited to property damage, loss of value of the product or loss of use of the product.