Black Widow Steel Motorcycle Carrier for RVs - 400 & 600 lb. Capacity

Finally, a motorcycle carrier that’s specifically designed to be used with your RV! The Black Widow Steel Motorcycle Carrier for RVs was intentionally engineered and tested to work with the bouncing and swaying of RVs, and comes with two hitch tubes so that it can be assembled on RVs with 2" or 2.5" hitch receivers.

Manufactured from heavy-duty steel, this carrier has a grit-coat track surface and comes with a 72.5" long loading ramp to facilitate getting your motorcycle up and onto the carrier. The loading ramp has diamond-plate traction for extra grip, and attaches to the passenger side of the carrier. On the driver side, an adjustable wheel chock allows you to secure wheels up to 7.25" W to prevent shifting in transit.

Tie-down eyelets allow you to bind your bike down directly to the steel carrier. During assembly, you will be able to select between a 2" or 2.5" hitch tube and anti-rattle device to match your RV’s hitch receiver. With the 2" hitch setup, this carrier supports up to 400 lbs.; ideal for dirt bikes and smaller motorcycles. The 2.5" hitch setup has a weight capacity of 600 lbs.; suitable for larger motorcycles.

Please note, this model is not compatible with 1.25" trailer hitches. Never exceed the maximum tongue rating of your trailer hitch and be aware that your hauling weight may be limited by your vehicle's suspension. Some vehicles may require air shocks or heavier springs to stiffen up the suspension and prevent sagging. Carriers are not recommended for hitches less than 12" from the ground to the bottom of the hitch. Hitch adapters are not recommended for use with this product.