
Safely get your car up in the air for repairing, servicing, or just for show with these automobile ramps. Made from high-quality aluminum, the car repair ramps come in pairs and feature aluminum bracing to ensure your vehicle is sturdy on the platforms. A 6 foot removable ramp sets onto the platform to get even low profile vehicles up in the air easily. The car service ramps have a low approach angle which is perfect for low profile cars such as Corvette, Mustang, Viper, Ferrari, Porsche, & low pick-up trucks. The car repair ramps feature a rung surface to provide excellent traction for even muddy or wet tires. A stable platform base and wheel stops at the end of the platform helps reduce the risk of driving off the end of the platform. Once atop the platform, the aluminum ramp can be removed to give extra space for repairing for vehicles with wheelbases no shorter than 97". The space gained by removing the ramps allow you to slide under the vehicle with a creeper or with other garage tools/equipment. With overall dimensions of 95.5" long x 16" wide x 12" high the aluminum car ramps only weigh 42 pounds each ramp (platform and ramp combined). The CR-7214 - car repair ramps come with a one year warranty against defects.
Car Repair Ramps Image Gallery

- Sturdy aluminum construction will never rust or corrode
- Wide ramp and platform supports many widths of tires
- Wheel stop at end of platform
- Added support braces for extra strength
- Gradual incline of 7.6° for low profile cars
- Removable aluminum ramps to make more room for servicing
- Quickly lifts vehicle 9.5" to do repairs
- Removable ramps can be used for loading vehicles onto trailers
- Includes safety straps for securing the removable ramps on trailers to prevent ramp kick out
- 1 year warranty
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Car Repair Ramps Product Specifications & Price
| Item # |
Manufacturer |
Description |
Overall Dimensions |
Lift Height |
Loading Angle |
Capacity |
Weight |
Price |
| CR-7214 |
Rage Powersport Products |
Pair of Aluminum Platforms & Ramps |
95.5" long x 16" wide x 12" high |
9.5" |
7.6° |
3,000 lbs Max Axle Weight (per pair) |
Platform: 22 lbs Ramp: 20 lbs |
+ 50 s&h
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| DWC-RD |
Pair of Folding Wheel Blocks Prevents vehicles from rolling away while being serviced - Folding design for compact storage Folding Wheel Blocks Product Details |
 Enlarge Image |
+ 6 s&h
|
| RR-RMAT-6 |
Racer Mat - Padded shop mat to lie or kneel on while working on vehicles. Dimensions: 64" L x 24" W x 2" H Garage Floor Mat Product Details |
 Enlarge Image |
+ Free Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs 4" Flat Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs 4" J-Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Winch Strap with Chain Anchor Product Details |
 Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Flat Hook Tie-Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 3" Trailer Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 5lbs 3" Flat Hook Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 18lbs 3" Ratcheting Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load) 20" Long Soft Loop Product Details |
 Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" Heavy Duty Load Binder Product Details |
 Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap 2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load Axle Tie Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook 2" Swivel Combination T-J Hook - 11,700 lb Rating Auto Combo Hook Product Details |
 Enlarge Image |
+ 5 s&h
|

|
|