The Motorcycle Ramp features the innovative EZ Traction flat plate surface for the ultimate in no-slip grip, and is available in multiple lengths. It is the widest motorcycle ramp on the market; comprised of three individual aluminum ramps that fit together to create a loading platform large enough for you to drive your bike into a pickup truck bed by yourself safely and confidently. The EZ Rizer can be used in multiple configurations for loading motorcycles, ATVs, UTVs, and mowing equipment up to 2,000 lbs.
The three-piece motorcycle truck ramp lets you load touring bikes, cruisers, sport bikes, or just about any size motorcycle into a pickup or onto a trailer with ease and confidence. With an industry-leading span of 47", the EZ Rizer is wide enough for one person to load a bike safely with plenty of foot room to keep steady.
Built for maximum versatility, the EZ Rizer folding motorcycle ramp has a single 19" wide center ramp flanked by two 14" wide side ramps that can be used in a variety of configurations. Use all three sections for drive-on loading of bigger, heavier motorcycles or other equipment like zero-turn mowers. The center ramp alone handles any size motorcycle you push up for loading, and the two side ramps are great for four-wheeled vehicles such as ATVs, UTVs, or lawn tractors, and a single side ramp even does the trick for smaller, lighter bikes like motocross or dual-sport. Quick-connecting support brackets slide into place to secure the ramps together and reduce ramp flex for increased stability in the loading process.
The system is available in 8', 9', 10', and 12' lengths that fold in half to just 5" for space-saving storage, and reinforced hinges create a 12° offset (when open) to form an arch for greater clearance with longer or lower-profile bikes.
A major innovation that sets the EZ Rizer motorcycle ramp apart is the EZ Traction flat plate surface. The punched surface produces a superior grip to prevent wheels from spinning and slipping, even in wet or muddy conditions.
The top end of each ramp has a deep lipped plate / hook combination that rests directly on the tailgate or trailer edge for the entire width of the ramp, so the EZ Rizer works well on just about any surface. The lip is rubber padded to prevent surface scratches and provide added grip and stability. At the bottom end, a tapered foot creates just the right angle to come in full contact with the ground, establishing the largest footprint possible for improved support and stability.
The EZ Rizer motorcycle truck ramp system includes two high quality cam buckle tie-down straps that attach to a dedicated bracket on the underside of each ramp section. These prevent kickback during loading, and the straight brackets minimize wear and tear on the motorcycle tie-downs. Always remember to secure the ramps when folded and placed in the pickup bed during transport with an extra set of tie-down straps (sold separately). Or, if you want to skip the tie-downs altogether, EZ Rizer's hybrid hook/plate attaching end is compatible with the optional, highly recommended Alumi-Loc (sold separately), which mounts permanently to your truck and provides a quick way to secure the ramp to the vehicle, eliminating the need for safety straps.
EZ Rizer is proudly manufactured in the USA by certified AWS welders for the highest quality standards and comes with a five year warranty.
I looked all over for a ramp to put my trike up into the back of my Dodge 3500 Big Horn truck. The Big Boy folding ramp system is the best I could find. It is sturdy and accommodates my needs. The company is great to deal with and the delivery was right on time as stated when I ordered on line. The customer service representative I spoke with, Jacqueline, was extremely knowledgeable and answered all my questions while I was purchasing the ramp.
After trying less expensive ramps and not feeling safe, I finally purchased this Big Boy EZ Rizer ramp for my Dodge dually truck. I like the non-slip surface, because I had a couple of bad experiences sliding down my cheaper ramps when they were wet. I like to travel with a motorcycle in the truck and pull a camper. This makes it a lot safer to load and unload than before.
Loading 2001 FLHRCI is a breeze. Perfect width and arch to put bike in my 2014 Chevy Silverado 5'8" (short) bed. Walk right up using clutch with throttle and back her down using just the gears and brake (not running). Solid ramp, well built, folds to 5'-just what I wanted and needed. These are "life-time" ramps for bike, quad, etc.
We just bought a 10' Big Boy EZ Rizer to load our 1500 Goldwing that weighs in excess of 1000 lbs (with rider), into my Dodge Sprinter. It works perfectly. Easy to put together and take apart. Folds up easily to load in the van after using. Great traction. I felt very confident riding my bike up and down the ramp. Also works great for my heavy work tools. Would recommend this ramp to anyone. We are Canadian and couldn't find a product here that came close.
Just recived my new ramps today. WOW!!! they are very nice and heavy duty. I would recomend these ramps to everyone. So well built they give you the confidence to ride the bike in the back of the truck by yourself. And I have a 1ton 4X4.
This ramp is replacing a full width 7' ramp that I bought someplace else. The 7' ramp worked ok with my half ton 2wheel drive pickup, but when I got my new 1 ton 4x4 is was just way too short, it took 2 people at least to load my electric wheelchair. the Big Boy EZ rizer is a much, much heavier ramp, better built and much better cleat holes for traction. It was almost impossible to load my wheel chair if the old ramp was wet. I do not believe that it will be any problem at all with the Big Boy EZ Rizer. I tried loading my wheel chair last night after I put the ramp on my pickup and had no trouble loading it by myself. I think if I had the nerve I could load the wheelchair while sitting in it... I must be getting old... I chickened out!
Received motorcycle ramp, it came packaged very well. Took it out of the box and I knew right away this was a high quality product. It came with very well written detailed instructions and was very easy to set up. I drove my 2004 Harley Electra glide classic up and the ramp and it was very solid, no flex. The best part of the product is the amazing traction it offers. I am a very happy biker! I would highly recommend this product and Discount Ramps to anyone who wants a great motorcycle ramp