The Black Widow motorcycle jack lets you lift the front or rear wheel of your motorcycle in seconds. This 28 lb jack has an amazing 1,100 lb lifting capacity. Simply slide the jack under your motorcycle, position it under the frame and turn the jack arm to raise the bike. This very affordable jack has a lifting range of 3-3/4" to 16-1/4" high. Made from heavy duty black powder coated steel. A rubber adapter on the top of the jack prevents slipping and from unnecessarily scratching the frame of your bike
This motorcycle jack has a black powder coated finish and is adjustable from 3-3/4" to 16-1/4" to easily jack up a front or rear tire.
The Black Widow Motorcycle Lift Jack is a sturdy motorcycle jack for a reasonable price. This motorcycle jack weighs 28 lbs and has a lifting capacity of 1,100 lbs to accommodate almost any type of motorcycle. The Black Widow jack features a durable glossy black powder coated finish. The total height range of the motorcycle jack is 3-3/4" to 16-1/4" high. You can get an additional 2" to 3-1/4" of height with the removable adapters that are included. To prevent slipping a grippy rubber padding has been added to the top of each adapter along with large bolts on the front to secure them in place. To increase the stability of the motorcycle jack a foot is welded onto each side. The Black Widow Motorcycle Lift Jack comes with a one year warranty.
Good: easy to use, small , portable Bad: wrench could use some improvements in the sense that it could have a ratcheting handle I bought it for my 2005 Kawasaki Vulcan 800 works great
I have been using K&L jacks for the last 2 years. This Jack is a third of the cost and 100% of the quality. It arrived the day after I ordered it!
What a great value. I've been using K&L jacks for a while now. At less than a third of the cost and 100% of the quality this was a great buy. Thanks!!!
I was looking for a product like this. The site was was easy to navigate and they had a great selection to choose from. Ordering was easy even as a guest and the product was to my door quickly. So far the product has been exactly what I was looking for. I would recommend this product and definitely this site to others!
I do not own a motorcycle, but needed a way to lift 4 x 8 sheets of T 1-11 siding and hold them in place while I nailed them. The older I get, the heavier those sheets become. I was not able to find anything intended for that task, but did find your product. . It worked perfectly! You might want to redesign it slightly and offer it to the DIY carpenter crowd. For lifting 4 x 8 sheets, it would be even better if the arms were a little further apart, and if the unit had a slightly larger base with a level. There is no competition in that market, it may well be worth your coming up with something. I can send pics of it in use if you want. (firstname.lastname@example.org)
Worked great. Works better with a 7/8 socket than with the handle that came with it. Would recommend to all my friends
Jack fits under the bike and safely lifts the bike by the crash bar. Couldn't use a regular two arm motorcycle lift because it's too big to go under and the exhaust pipe is lower that the frame.
Perfect for almost all makes and models of bikes, the Black Widow is well constructed. I would highly recommend this jack to anyone. High quality at a low price.
The quality of the jack is better than I expected. I exceeds the advertised attributes. I am totally satisfied.
SUPER LIFT FOR LIFTING THE FRONT OR BACK WHEEL.VERY WELL CONSTRUCTED. I WILL RECOMEND THIS ITEM TO ALL MY BIKER FRIENDS.
Well designed and built , works' better than I expected ...
Works great, well constructed jack, used a 7/8" socket . Excellent product for the money.
I wish either the bike were taller or this product was shorter so I could jack the bike without sitting on it. Other than that the product works great.
Looking for a lift for my 500 Vulcan this fit the bill. 5 minutes from out of the box till I had the bike off its wheel ready to service.
I have a 2008 Yamaha Royal Star Venture. The lower end of the engine sits below the frame so most jacks do not work. The Black Widow Motorcycle lift jack with the frame adapters works great. This jack has a wide enough base that the bike is very stable. I would recommend the jack to anyone who has a Royal Star Venture.
This is a no-frills, basic scissor jack. I use it on my lift table and it works with both my Heritage Softail and my Ultra Limited. I couldn't give it five stars because I have questions about its quality. It is obvious that the inside of the base on my jack has heavy surface rust. They chose to just powder coat over the rust. Makes me suspicious of the quality of the other components on this jack. Time will tell... Like I said, for the price, hard to complain. Discount Ramps did a great job of processing and quickly shipping the order. I'd give them five stars....
Seems to be well constructed....Looks like it will perform for years...
This is a well constructed, heavy-duty scissor jack. The mechanism works well. Seems like this jack will last for a long time. Great price too!
This lift works perfectly! Easily lifts rear wheel of loaded Ultra Limited off the ground for maintenance/engine work/wheel cleaning. Light weight and easy to use with a 7/8" socket wrench.
The jack works perfectly for lifting the front end of my Harley FLHTK so I can do work on the front wheel while keeping the bike steady. The jack seems to be built very well. I used a ratchet to get more leverage to lift my bike.
Does a great job on my 2001 FLHTC, GREAT JACK.Bought it for my titan 1500XLT table lift.
I bought this for my Victory Vegas 8 ball. Received it yesterday. It works well, is light enough to move around my shop, and it supports the bike well. It's very stable.
This is a serious jack that will easily lift my Fat Boy. I should'a got this a long time ago.
Sturdy , well built jack, but socket/handle for raising should longer or extendable for increased leverage, especially when initially getting bike off the ground.
If you have a Harley Davidson with a low exhaust system below the frame, this is the jack for you!
This is a GREAT product! I bought it primarily for use with my motorcycles, and it works very well for different models. It is extremely stable, and the mechanical action allows for precise small adjustments to be made in height of the lift. It is able to fit underneath all the bikes and trikes I've tried it with. That is a big plus! But the jack also has other uses for many different applications. It is a very useful product that does not cost a lot of money. How can you beat that? I am well pleased with the lift, and I wish I had been able to have it for use years ago. I would recommend this to anyone who needs to lift their motorcycle. It does not require much room for use compared to most of the usual motorcycle lifts and that is a big plus. When the machine is lifted, the jack does not get in the way of the work that's being done any where around the exterior of the bike. GREAT PRODUCT!
I had limited storage space in my garage and needed a jack or stand to store my Honda Shadow 1100 vertically in the rear corner of my garage. This is exactly what I needed. This jack provided the room I needed, and now able to have both of my vehicles in the garage. Good value and great service from Discount Ramps with expedited delivery to Canada.
I AM REALLY IMPRESSED WITH THIS JACK STAND, ITS HARD TO TELL WHEN BUYING ON LINE BUT THIS PRODUCT IS GREAT, HIGHLY RECCOMENDED
This works perfectly. I did not want or need a full bike lift. I have a Harley Ultra Classic limited and this has no problem getting the wheels off the ground for cleaning and maintenance.